Connecting The Stereo Audio Output; Connecting The Headset Audio Output - BenQ SH Series Quick Start Manual

Connecting the stereo audio output

This display provides a set of stereo audio
output terminals (RCA type) for delivering the
audio signal to a sound system or other audio
devices.
Connect the audio input terminals of an
amplifier or other audio device to the AUDIO
OUTPUT L/R terminals on the display using a
suitable audio cable.
This output is always available. Its level is
fixed and cannot be adjusted by the Volume
setting of the display.
Do not connect a headset to this output. Use
the headset output socket instead. See

"Connecting the headset audio output"

below.
Connecting the headset audio output
This display provides a stereo headset output
socket for delivering the audio signal to a
stereo headset.
Connect the stereo headset plug (3.5mm
Mini-jack type) to the stereo headset output
socket on the display using a suitable audio
cable.
Once connected, the display speakers will
be muted automatically.
Avoid prolonged use of the headset or
listening at an excessive volume level,
otherwise your hearing may be damaged.
Audio cable
Headset
Section 1: Quick Start Guide
Audio
amplifier
13