Sent Fax Is Received In An Incorrect Size; Received Fax Is Not Printed - Epson ET-16650 User Manual

• If you set the product to save received faxes on a memory device, connect the selected memory
device containing the save fax folder to the product. Once the faxes are saved on the memory device,
they are deleted from the product's memory.
Note: Make sure the memory device has enough available memory and is not write protected.
• If the memory is full, try the following:
• Send a monochrome fax using the direct sending feature
• Send your faxes in smaller batches
• If the product cannot print a received fax due to a product error, such as a paper jam, the memory full
error may appear. Clear any product errors, then ask the sender to resend the fax.
Parent topic:

Sent Fax is Received in an Incorrect Size

If your recipient receives a fax in an incorrect size, try these solutions:
• If you are trying to fax an A3-size document, make sure the recipient's fax machine supports the paper
size. If the message OK (Reduced Size) appears in the fax transmission report, the recipient's fax
machine does not support A3-size documents.
• If you are sending a fax using the scanner glass, make sure your original is placed correctly and that
the correct paper size is selected on the control panel.
• Clean the scanner glass and document cover.
Parent topic:
Related tasks
Cleaning Your Product
Related topics
Placing Originals on the Product

Received Fax is Not Printed

If a received fax is not printed, try these solutions:
• Make sure the product is free of errors. The product cannot print received faxes if an error has
occurred with the product, such as a paper jam.
Solving Faxing Problems
Solving Faxing Problems
321