Changing Or Updating Network Connections; Accessing The Web Config Utility - Epson ET-16650 User Manual

5. Select Proceed to save your settings.
6. Select Close to exit.
7. Select Connection Check to verify the connection to the email server.
Parent topic:
Related tasks
Scanning to Email
Forwarding Received Faxes

Changing or Updating Network Connections

See these sections to change or update how your product connects to a network.

Accessing the Web Config Utility

Changing a USB Connection to a Wi-Fi Connection
Changing a Wi-Fi Connection to a Wired Network Connection
Connecting to a New Wi-Fi Router
Disabling Wi-Fi Features
Parent topic:
Accessing the Web Config Utility
You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
Note: For more information on the Web Config utility, see the
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.
3. On a computer or other device connected to the same network as your product, open a web
browser.
4. Enter your product's IP address into the address bar.
You see the available Web Config utility options.
Parent topic:
Wi-Fi or Wired Networking
Wi-Fi or Wired Networking
Changing or Updating Network Connections
Administrator's
67
Guide.