Selecting The Cooking Function, Temperature & Time - Cuisinart CPC-900XA Instruction Booklet

line of the cooking pot. For foods such as
dried vegetables and beans, or rice and
grains, the total volume must not exceed
12 cups.
15 Cups
5.
NOTE: Overfilling may clog the pressure
limit valve, which can cause excess pressure
to develop.
IMPORTANT: Always use at least 1 cup
of liquid when pressure cooking.
7. If the sealing ring assembly has been
removed from lid, check to ensure flexible
sealing ring is securely in place on the
metal plate. Then, holding the knob on
the metal plate, place the assembly over
the centre post of inner lid and press
down firmly to secure.
FACES OUTWARDS. See note on metal
plate.
8. To close the lid, remove any food residue
from upper rim of cooking pot to ensure
a proper seal. Lower the lid, then turn the
lid handle clockwise to close into place.
The unit will beep two times when
turning the handle and two times when
the lid is lowered.
NOTE: If the lid is not closed correctly,
scalding may result. LID will appear
flashing in the LCD and the unit will beep.
12 Cups
6.
BE SURE KNOB
SELECTING THE COOKING
FUNCTION, TEMPERATURE &
TIME
Select Cooking Function (see page
explanation of cooking functions):
With the unit turned on and the LCD
displayed, rotate the Select and Confirm
dial to select the desired cooking function.
The function will flash. To confirm the
cooking function, press the Select and
Confirm dial. The selected function is now
confirmed and no longer flashing.
Once the cooking function is confirmed, the
START/ STOP, TIME and TEMP/PRESSURE
buttons will flash. At this time you can start
cooking by pressing the START/ STOP
button or change the default temperature
and time.
Setting the Temperature
Each cooking function has a default cooking
temperature (Low, High) or pressure setting
(Low, High, and High+). To change the
default temperature or pressure setting,
press the TEMP/PRESSURE button. The
default temperature will flash. Rotate the
Select and Confirm dial to the desired
temperature / pressure setting. To confirm
the temperature / pressure setting, press
the Select and Confirm dial.
The High + Pressure Setting
High pressure + cooks food under higher
pressure and assists in reducing cooking
time a little more.
Setting the Time
Each cooking function has a default cooking
time. To change the default time, press the
TIME button. The default time will flash.
Rotate the Select and Confirm dial to
increase or decrease the time. To confirm
the time, press the Select and Confirm dial.
8
9 for