Self Timer - Hasselblad H4D-200 MS User Manual

H4D
There are a number of more advanced features that while not necessarily used every
day still remain immediately accessible through the menu system. They provide the
integral finesses that make the H4D a powerful and sophisticated tool to satisfy a variety
of professional demands.
There are five main functions:
Self timer, Bracketing, Interval timer, Settings and Drive.
An important point to remember is that certain options are only available when the
relevant screen has been accessed. For example, in Self Timer the choice of 'delay/mirror
up' or 'mirror up/ delay' is only available (by turning the rear control wheel - lower row
on display) when the relevant function has been chosen (by turning the front control
wheel - upper row on display)
1 Self timer
The self timer allows a delay in the activation of the shutter and a change in sequence of
the mirror movement. Normally the mirror is raised before the shutter is tripped creating
a pause between the two actions to minimize camera vibration. However, during this
pause there will be no image in the viewfinder and no light metering available for any
eventual exposure change. Therefore the Self timer function can be set to a sequence
where the delay is followed by the mirror being raised instead. Normally the mirror
will instantly return after a capture but you can also choose a setting where the mirror
remains raised.
As it provides a timed, remote shutter release function it can be used instead of a remote
release cable/cord/device when split-second timing is not critical. The camera's expo-
sure settings (Manual or Auto) will be according to the light metering requirements just
prior to the mirror being raised so, in very changeable lighting conditions, choose the
method most suitable if using long delays.
103

1 Self Timer

options available
DELAY / MIRROR UP
options available
MIRROR UP / DELAY
MIRROR GOES DOWN
options available
MIRROR REMAINS UP
2 - 60 s
or
or