2 INTRODUCTION
2.3GUIDELINES FOR THE DISPOSAL OF SCRAP PRODUCTS _____________________
2.3.1
DURING SERVICE LIFE __________________________________________________
All the use d fluids a nd pa rts mus t be controlle d a s ha za rdous ma te ria ls ma te ria l. Re comme nde d proce dure s mus t be followe d for
the ir s a fe re mova l.
If a fluid le a k occurs, conta in the s pill to ma ke s ure tha t the le a k doe s not flow into the ground or dra ina ge sys te m. Follow the
re gula tions in force to ma ke s ure tha t le a ks a re controlle d.
The ma inte na nce proce dure s in this ma nua l ma ke sure that the da ma ge tha t the ma chine ca n ca us e in the loca l e nvironme nt is
controlled.
Whe n the ma chine comple te s its full s e rvice life , the following a ctions mus t be ta ke n.
2.3.2
END OF SERVICE LIFE ____________________________________________________
The s e guide line s mus t be us e d with a pplica ble He a lth, S a fe ty a nd Environme nta l la ws. Alwa ys us e the a pprove d loca l wa ste
dis posa l a nd a ge ncie s for re cycle d ma te ria ls .
•
Park the machine in an applicable area to use all of the necessary lifting equipment.
•
Use correct tools and Personal Protective Equipment (PPE) and take instruction from the technical
manuals applicable to the machine.
•
Remove and store correctly
1. Batteries
2. Fuel
3. Engine coolant
4. Oils
•
Read the Technical Manual before you begin to disassemble the machine. Plan the disassembly, give
attention to parts that are in a state of mechanical pressure or contain stored energy e.g springs.
•
Items that continue to have a service life must be separated and returned to the local dealer.
•
Items that are worn must be separated into the material groups and removed according to the agencies
for the recycled materials that are available. Common examples.
• Steel
• Non ferrous metals
• Plastic materials
• Rubber
• Electrical and Electronic Components
•
Some parts are not easily separated e.g Hydraulic hose. These materials must be added to the
"General discarded materials" area.
•
Do not burn discarded materials.
Cha nge the ma chine ry re cords to show tha t the ma chine is not in ope ra tion a nd is disca rde d. S upply this s e ria l numbe r to The
J a cobse n Wa rra nty De pa rtme nt to clos e the ir re cords .
en-6
• Aluminium
• Brass
• Copper
• Identified
• Can be recycled
• Can not be recycled
• Not identified