Jacobsen ZB Series Safety, Operation And Maintenance Manual page 45

5.2.Z.66 WARNING HYDRAULIC OIL-LEVEL LOW ______________________________
When this screen is shown, the hydraulic oil level is low.
Fill with clean hydraulic oil at the earliest opportunity.
Press the button below the  to confirm the fault.
5.2.Z.67 WARNING SERVICE NEEDED _______________________________________
When this screen is shown, the machine has reached a service interval as
shown in the maintenance chart.
Press the button below the  to confirm the fault.
5.2.Z.68 WARNING SOLENOID FAULT _______________________________________
When this screen is shown, there is a hydraulic circuit solenoid fault.
Go to i/o diagnostics for solenoid identification.
Press the button below the  to confirm the fault.
5.2.Z.69 WARNING (TST) TILT SENSOR TECHNOLOGY FAULT ___________________
When this screen is shown, there is a fault with the TST. Stop as soon as
possible and contact your service dealer
Press the button below the  to confirm the fault.
5 CONTROLS
1
1
!
SERVICE
REQUIRED
1
!
FAULT SOLENOID
1
™
!
en-45