Table of Contents
Advertisement
12 SPECIFICATIONS
12.4
MACHINE SPECIFICATION ____________________________________________
Frame construction: Heavy duty steel chassis with formed steel frame rails.
Cutter Deck Drive:
Three individual hydraulic motors with dual belt final drive.
Transmission:
Hydrostatic closed loop parallel cross series SureTrac system. Variable displacement
piston pump. Front high torque fixed displacement piston wheel motors. Full time auto
4WD forward, on demand 4 WD in reverse.
Speeds:
Cutting:
0 - 12 km/h (0 - 7.5 mph) Forward
0 - 6.4 km/h (0 - 4 mph) Reverse
Transport:
0 - 25 km/h (0 - 15.5 mph) Forward
0 - 6.4 km/h (0 - 4 mph) Reverse
Creep
0 - 8 km/h (0 - 5 mph) Forward
0 - 5 km/h (0 - 3.1 mph) Reverse
Steering:
Q-AMP
Cooling System:
Side by side pressurised radiator/hydraulic oil cooler; 7.8 litre (8.25 qt).
Reversing Fan:
Hydraulically driven, temperature controlled reversible engine fan. Reverses automatically
or on demand to clear air intake screens.
Ground pressure:
Depends on the tyre pressures and the accessories installed.
Brakes:
Hydrostatic braking with wet disc parking brakes on the front wheels.
Battery:
BBMS 369 70 Amp Hours, 570 CCA
Tie Down Points:
Rated at 12.3 kN when strapped down at
The tie down rating was calculated using measurements according to the requirements of
BS ISO
Cab Climate Control:
Air conditioning system
Heating performance
Cooling performance
Refrigerant
Recommended refrigerant level
Operating voltage
Power consumption, clutch
Refrigerant oil
Refrigerant oil - in the compressor
en-124
®
variable rate hydrostatic powered equal displacement cylinders to rear wheels.
15818:2017.
Technical data
45° +/-
5°.
6.0 kW
4.5 kW
R 134A
800 g
12 V
max.49W
135 cc
50 cc
Advertisement
Table of Contents
