Advertisement
1.5
Setting Controller Parameters
After the controller powers up,
Press
, then select
1 Set Parameters, then
Press
again to advanced parameter
pin-number confirmation interface.
Press the
and
decrease values to enter the correct pin-
number password 0~9;
Press the
to move right, entering the
password number for all 4 positions.
Press the
key to save pin-number.
(Factory default password is 1234 and
users can modify it via PC connection.)
Press the
key and
screen; select parameter you want to
configure and Press the
parameter will highlight with black),
Press the
key or
parameter value,
Parameter Setting
01 Timer Start
Start Time
Duration
18:50
08:30
Press the
key to confirm setting and
the set value will be saved into internal
FLASH
1001281353
Oshkosh Corporation Classification ‐ Restricted
MACHINE OPERATION
JLG LT
to increase or
key to scroll
key (the
key to change
JLG Industries (Australia) Pty Ltd
Oshkosh Corporation
3
Date and Time Setting:
After controller powers up, Press
then select 3 Time Calibration,
Press
again to the Date and Time
Setting interface. The first line is current
date and time, and the second line is the
time information of user's modification.
Press the
key or
or decrease the value.
Date and Time
Current Time:
13-01-04 (5) 08:27:55
13-01-04 (5) 08:27:23
Press the
key to confirm setting and
the bit will right move automatically.
Number "5" in the parenthesis is the week
information. It is set by the microprocessor
based on current date, so the user does
not need to modify it.
,
key to increase
Page 1-19
28JUL22
Advertisement
