Advertisement
1.5
3
1.5.5
LT
CONTROLLER
CONTROL PANEL
Fig 1.5.9
Control Panel Push Buttons
Stop/Reset
Stop lighting tower operation
Reset alarm when failure occurs
Lamp test in stop mode
(press for at least three seconds)
Manual Start Mode
Press this key to enter Manual Mode
Auto Mode
Press this key to enter auto start mode
select interface; use up/down arrow keys
to select mode and press "AUTO" to
confirm selection.
Mute
If alarm occurs, pressing the button can
remove alarm siren, and the indicator will
light up; press the button again to reset
the alarm and the indicator will turn off. If
the alarm re-triggers in mute status, the
controller will remove the mute status.
1001281353
Oshkosh Corporation Classification ‐ Restricted
MACHINE OPERATION
JLG LT
JLG Industries (Australia) Pty Ltd
Oshkosh Corporation
3
Strobe Light / Beacon (if fitted)
Switches the beacon light on or off.
(Only when the engine is running)
Start
Start lighting tower set in Manual Mode.
Light Off
When running in the normal manual mode,
press this button once to turn-off one light.
Light On
When running in the normal manual mode,
press this button once to turn-on one light.
Menu / Confirm
Press this key to enter menu interface. In
parameter setting interface press this key
to right shift cursor and confirm the setting.
Down/Config
1) Screen Scroll
2) Down cursor and decrease value
of menu setting
Up/Config
1) Screen Scroll
2) Up cursor and increase value of
menu setting.
"- "
"+"
Page 1-17
28JUL22
Advertisement
