UPS5000-E-(40 kVA-320 kVA)
User Manual
Figure 5-38 EPO alarm on the WebUI
5.10 Clearing the EPO State
Procedure
Step 1 Turn off the EPO switch to clear the EPO state. Ensure that the EPO switch connected to the
dry contact card is not in the EPO state.
Step 2 Clear the EPO alarm.
Issue 10 (2015-09-15)
After you turn on the EPO switch, the EPO and No power supplied alarms are displayed on the LCD.
LCD
On the main screen, tap System Info. and
If you have not logged in, enter a user name and password, and tap
login screen displayed. In the displayed dialog box, tap Yes to clear the EPO alarm, as
shown in
Figure 5-39
and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
. On the Alarms screen, tap Clear Faults.
Figure
5-40.
5 Operations
on the
178