Registration Of Accessory Handset - VTech i 5867 Manual

Hide thumbs Also See for i 5867:

Table of Contents

Registration of Accessory Handset

After charging, the screen will display:

Enter the BASE ID Code located on the underside of the

•

Base Unit.

Press OK to complete the registration process.

•

NOTE: If after charging the Handset displays "Searching for Base...", press the NEW

softkey. "Enter Base ID" will now be displayed. Follow the above steps.

Wait approximately 15 - 60 seconds. You will hear confirmation beeps from the Base and

Handset. The newly registered Handset will now be assigned the lowest extension number

not previously assigned to a different system Handset (1 - 8).

If you do not enter the correct digit sequence, you will see Invalid Base ID! and hear an

error tone. Press the left NavKey

erase a character, and carefully re-enter the Base ID Code.

NOTE: The 15-digit BASE ID Code may contain numbers and characters, including 0

through 9, as well as *. Make sure you enter all 15 digits.

Congratulations! You can now enjoy the benefits of your VTech Multi-Handset system.

Enter Base ID

################

to backpace or press the right softkey

Table of Contents