Nikon KeyMission 360 Quick Start Manual page 90

4
Follow the on-screen instructions and when
the screen shown on the right is displayed, tap
KeyMission 360_xxxxxxxx.
"xxxxxxxx" varies depending on the camera.
5
When a confirmation dialog for pairing is displayed, tap Pairing
on the lower right of the screen (the button name varies
depending on the model of the smart device).
If pairing is successful, the screen shown
on the right is displayed.
If pairing is successful, the smart device is
automatically paired simply by starting
the SnapBridge 360/170 app when the
camera is turned on next time (except
when End pairing is selected).
If pairing fails, the status lamps flash red
six times at the same time. When a
message indicating that pairing has failed is displayed on the screen, tap OK and
repeat the procedure from step 1.
B
Where the Use of Wireless Devices Is Prohibited
Turn on the airplane mode switch on the
camera. This will temporarily interrupt the
constant connection with the smart device,
but the connection is automatically re-
established when airplane mode is turned
off.
C
The Display Language
The display language of the SnapBridge 360/170 app is automatically set according to the
display language of the smart device. If the display language of the smart device is not
supported by the SnapBridge 360/170 app, it is set to English.
C
Shooting/Playback/Setting with the SnapBridge 360/170 App
See the SnapBridge 360/170 app online help for more information.
Getting Started
Pairing with a Smartphone or Tablet
Connect to Camera
Connected to KeyMission 360_xxxxxxxx
For iOS or
NFC-incompatible
Android devices
13
Connect to Camera
Camera name
KeyMission 360_xxxxxxxx
Connect
For
NFC-compatible
Android devices