Nikon KeyMission 360 Quick Start Manual page 164

[II
Head-Mounted Display (Sample)
You can experience virtual reality by setting a smart device with the SnapBridge 360/170 app installed to this product, and
playing back images captured with KeyMission 360.
• This product is not covered by the warranty because it is a sample.
• This product is a paper product.
- Keep it away from flames.
- Do not use it in places of high temperature and humidity.
-When using this product, keep it about 1 em (0.4 in.) away from your skin. Contact with your skin may smudge this product
with oil or sweat from your skin.
• Do not leave the lens pointed at the sun or intense light sources. The light may condense and cause fire.
• Do not look directly at the sun through the lens.
• Do not use this product while moving.
• To prevent the smart device from falling, do not turn this product upside down during use.
• You may have physical symptoms such as dizziness or nausea if you use this product for an extended period of time. In such
cases, discontinue use immediately.
1
Join the lens part {
1 )
and side part
{2).
• Fold the lens part and side part along their folding lines.
• Fold the lens part into a box shape, and insert the tabs (4i) into the joint
slots(:~~).
2
Fold along the dashed lines.
• Affix the included foam tape ( 1:), and adjust the position of the smart device as necessary.
• Adjust the length of the foam tape by cutting it.
3
Fold in the side part, and then insert the bottom tabs to secure the sides.
Assembly is complete when the sides are secured.
4
Set the smart device into the front pocket and play back images.
See the SnapBridge 360/170 app online help for details about playing back images.