CAMERA PREP: Preparing the camera MAKE SURE... Battery is fully charged (see manual “Charging the Battery” page 6) Micro SD card with sufficient space has been installed (see page 4) Airplane Mode has been shut off (see page 9) Camera is shut OFF (if not hold down video button for 3 seconds) Open Door Battery latch...
Page 3
STEP ONE: SMART DEVICE: Check Smart Device Settings MAKE SURE... • Wi-Fi setting is ON • Bluetooth setting is ON ® Make sure Wi-Fi is ON Go to “Settings” on your smart device Make sure Bluetooth is ON For latest firmware and app information www.nikonusa.com...
APP DOWNLOAD: Download SnapBridge 360/170 App • Go to the Google Play Store on your smart device ™ • Search for SnapBridge 360/170 and select correct app • Download and Install SnapBridge 360/170 • Go back to your home screen and click on app Download / Install SnapBridge 360/170 App...
STEP ONE: BLUETOOTH PAIRING: Pairing the Camera ON YOUR SMART DEVICE ON YOUR CAMERA ON YOUR SMART DEVICE Launch SnapBridge Press and Hold movie button Tap the camera name 360/170 on your until the green status lamps flash when it appears. The simultaneoulsly...
Page 6
Connect tab. This symbol means you are paired with Bluetooth If you need to un-pair and re-pair your Android powered device and the KeyMission 360 camera, read this article for detailed instructions on how to do so. Go to www.nikon.usa/keymission360...
REMOTE PHOTOGRAPHY: If you want to shoot remotely or download stills or videos, you will need to connect to the camera’s Wi-Fi between the KeyMission 360 camera and the SnapBridge 360/170 app. Make sure to turn on Wi-Fi in the Wi-Fi settings of your smart device After switching to your Camera’s Wi-Fi signal,...
Page 8
DOWNLOADING: Downloading Videos / Stills Navigate to Select the video you want You may see the following prompt: ‘To reduce the time required, the Camera to download and press Connect Gallery Camera Other Tab and Select ‘Download’ to download download will begin when there ‘Download it to your device is more bandwidth available.
Page 9
SHARING: Saving videos for YouTube & Facebook ™ ® Select the edit icon and choose When the edit screen ‘Add YouTube metadata’ returns, press ‘Cancel’...
Page 10
Press the ‘Share’ button Return to the gallery and select the file that now has and choose Facebook ® the YouTube metadata added. or YouTube ™ Follow instructions in Facebook or YouTube ® ™ to upload and show your movies or photos.
YouTube is a trademark of Google Inc. Google Play is a trademark of Google Inc. Facebook is a trademark of later (latest version of iOS 8 or iOS 9 recommended) plus iOS 10.2 for KeyMission 360. The KeyMission 360 firmware Facebook Inc.