Table of Contents
Advertisement
DEL: delete the current step of the voices selected. Be
careful, there is no confirmation panel.
PLAY: When on, this switch allows the sequencer to run.
To help with your creative workflow, independent
sequencer presets can be saved and recalled.
[SEQUENCER]: This clickable label opens a menu that
shows you the available sequencer presets for recall:
9.2.1
Sequencer display module
The miniSyn'X's sequencer display panel makes it easy to create, verify and modify your
sequences in real time, while the sequencer is running.
Three zoom modes can be used to display the internal values, selected by the '+' and '–'
buttons. Zoom 1 shows the entire range of values, useful when using the sequencer to
modulate parameters such as filter frequency, oscillator level or shape. Zoom 2 and Zoom 3
show four and two octaves respectively. The slider allows you to move the displayed part inside
the whole range.
The current time slot is shown as a white cursor line at the bottom of the view.
Each of the current sequences is displayed in a different color. The sequences can be
highlighted or hidden by checking or un-checking the corresponding colored boxes to the left of
the event display.
You can also modify the sequencer with the mouse: select the sequence you want to adjust
(Edit check boxes) with the left button, click on the panel to add or modify a step, with the
right button, click to erase a step.
Using CTRL+Click allows linking a step to another for a legato effect.
Using ALT+Click allows tuning the entered note to the exact pitch.
In the above view, there is one recorded sequence, track 1, which is assigned to voice 4 and 12
(so playing the sound of Layer 4 with 2 unison). Track 2 is selected too, assigned to voice 5,
but not yet recorded. The TRIG button is pressed, so the sequence will be played as soon as a
note if played on the keyboard.
- 27 -
Advertisement
Table of Contents
