Table of Contents
Advertisement
9.1.8
Joystick (Bend/LFO)
The miniSyn'X offers an advanced joystick feature associated with a monophonic independent
sine LFO
LFO sliders : Specify the coarse and fine tune of the monophonic low frequency oscillator.
(Speed)
TO OSC sliders: This sets the amount of the modulation sent to both oscillators tune when the
joystick is moved vertically (BEND) or horizontally to the right (LFO)
Tip : Use the Joystick to add a mod wheel controlled Vibrato by setting the right rate to the
LFO, then assign the Wheel led to OSC, and finally set the good modulation amount with the
OSC LFO Slider
TO FILTER sliders: This sets the amount of the modulation sent to the Filter frequency cutoff
when the joystick is moved vertically (BEND) or horizontally to the right (LFO)
Tip : Use the Joystick to add a mod wheel controlled Wah effect by setting the right rate to the
LFO, then assign the Wheel led to Filter, and finally set the good modulation amount with the
Flt LFO Slider
WHEEL LEDs: Connect the modulation wheel to the horizontal left and/or right movement of
the joystick.
UPPER/BOTH/LOWER Switch: This 3 position toggle control let you choose which layers will
be affected by the Joystick Modulations : Lower, Upper, or both
9.1.9
Master
MASTER: This knob controls the general output level of the miniSyn'X.
TUNE: This knob controls the global tune of the miniSyn'X. It is not saved within the preset
and is used to adapt the tune of the synthesizer to the other instruments. Of course it is saved
within your music application project.
SPRAY: This knob controls how different specific parameters micro changes are applied to the
patch voices. When turned left, the settings are applied identically to all the voices, when
turned right, they are applied with an exclusive analog indetermination. ( Please be aware that
this global algorithm includes processing of the Oscillators pitch micro variations, possibly
resulting in an unstable pitch when turned fully clockwise )
- 25 -
Advertisement
Table of Contents
