Table of Contents
Advertisement
Moving Tracks (MOVE Function)
Use the unit to carry out this function.
1
In Stop mode, press the EDIT/ENTER
button and turn the JOG dial until
"MOVE?" is displayed.
2
Press the SET button.
JOG dial
• You can listen to the track by pressing the 6
button. The track to be moved is repeatedly
played.
Turn the JOG dial (or press the 4 or
3
¢ button) to select the tack number to
be moved.
4
Press the SET button.
Erasing Tracks (ERASE Function)
Use the unit to carry out this function.
1
In Stop mode, press the EDIT/ENTER
button and turn the JOG dial until
"ERASE?" is displayed.
2
Press the SET button.
JOG dial
• You can listen to the track by pressing the 6
button. The track to be erased is repeatedly
played.
Turn the JOG dial (or press the 4 or
3
¢ button) to select the tack number to
be erased.
Erasing All the Tracks (ALL ERASE Function)
Use the unit to carry out this function.
1
In Stop mode, press the EDIT/ENTER button and turn the JOG dial until "ALL ERASE?"
is displayed.
2
Press the SET button.
"ERASE OK? PUSH ENTER" appears.
3
Press the EDIT/ENTER button.
"COMPLETE" appears, indicating successful erasing.
All the tracks in the MD are erased and "BLANK DISC" is displayed.
• When you turn off the power by pressing the 7/CHARGE button, "UTOC Writing" will be displayed and the
edited contents are written.
To cancel the operation, press the 7/CHARGE button in step 1 or 2.
5
Track to moved
6
7
• When you turn off the power by pressing the 7/
To cancel the operation, press the 7/CHARGE button
in step 1 through 6 until the display returns to the origi-
nal display.
4
5
• When you turn off the power by pressing the 7/
Track to be erased
To cancel the operation, press the 7/CHARGE button
in step 1 through 4 until the display returns to the origi-
nal display.
Turn the JOG dial (or press the 4 or
¢ button) to select the destination to
which the track is to be moved.
Track to be moved
• If you are playing back the MD, the destination
track is repeatedly played.
Press the SET button.
"PUSH ENTER" appears.
Press the EDIT/ENTER button.
"COMPLETE" and "TOC" appear, indicating suc-
cessful recording.
CHARGE button, "UTOC Writing" will be displayed
and the edited contents are written. (The "TOC" indi-
cator goes out.)
Press the SET button.
"ERASE OK? PUSH ENTER" appears.
Press the EDIT/ENTER button.
"COMPLETE" appears, indicating successful eras-
ing.
The selected track is erased and the track number
is decreased by 1.
CHARGE button, "UTOC Writing" will be displayed
and the edited contents are written.
Destination track
10
11
Advertisement
Table of Contents
