Program Tracks - JVC RC-E561B-DAB Instruction Manual

To search for a particular passage during playback (track scanning at high speed)
Press and hold the
until desired passage appears, and then release the button. Playback will start again from this
point.
To select a song which track number exceeds 10 (for MP3 disc only)
To select a song/track which number exceeds 10, press the 10/FOLD./MEM.+ or
10/FOLD./MEM.- button each time to skip forward/backward 10 tracks, then press the
/TUN+ or /TUN- button to select desired track. For example: to select the 17th track, press
10/FOLD./MEM.+ button, and then the
To Select A Desired Folder (for MP3 disc only)
(if the MP3 disc contains more than one folder)
To skip to the desired folder during playback, press and hold the 10/FOLD./MEM.+ or
10/FOLD./MEM.- button for about 2 seconds to skip to next/previous folder.

PROGRAM TRACKS

Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3
99 tracks can be stored in the memory in any order.
1. In stop mode, press the PROG./M/P-MODE button, the "T-000" will flash and the "P01"
indicator will be on.
2. Press the CD
to be programmed.
3. Press the PROG./M/P-MODE button to enter. The display changes to show "P02".
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the /SELECT/SCAN/PAIR button to start playback from the first programmed
track.
6. Press the /MENU/INFO button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the /MENU/INFO button when the disc is stopped.
2. Open the CD compartment lid, program will be erased.
NOTE: If there are several folders in the USB or MP3 disc , it is necessary to program folders first and
then the tracks. Press the 10/FOLD./MEM.+ or 10/FOLD./MEM
program. After that, press
programmed, press the PROG./M/P-MODE button to enter. The display changes to show "P02".
REPEAT
To Repeat a Single Track
1. Press the PROG./M/P-MODE button once in play mode, "REP-1" will show steady on
the display. The current track will be played repeatedly until the
pressed.
2. To cancel Repeat function, press the PROG./M/P-MODE button until the "REP-1"
disappear on the LCD display.
To repeat all the Tracks
1. Press PROG./M/P-MODE button in play mode till the "REP-ALL" shows steady on the
display, all tracks on the disc will be played repeatedly until the
pressed.
2. To cancel Repeat function, press the PROG./M/P-MODE button until the "REP-ALL" disa-
ppear on the LCD display.
/TUN+ or /TUN- button to scan the current playing track at high speed
/TUN+ or /TUN- button to select the first desired track
/TUN+ or /TUN- button to chose the first desired track to be
/TUN+ button six times immediately.
.-
to select the first folder you want to
EN
/MENU/INFO button is
/MENU/INFO button is