Moving Tracks (Move Function); Erasing Tracks (Erase Function); Erasing All The Tracks (All Erase Function) - JVC XM-R70 Instructions Manual

Moving Tracks (MOVE Function)

Use the unit to carry out this function.
1 In Stop mode, press the EDIT/ENTER
button and turn the JOG dial until
"MOVE?" is displayed.
2 Press the SET button.
JOG dial
• You can listen to the track by pressing the 6
button. The track to be moved is repeatedly
played.
Turn the JOG dial (or press the 4 or
3
¢ button) to select the track number
to be moved.
4 Press the SET button.

Erasing Tracks (ERASE Function)

Use the unit to carry out this function.
1 In Stop mode, press the EDIT/ENTER
button and turn the JOG dial until
"ERASE?" is displayed.
2 Press the SET button.
JOG dial
• You can listen to the track by pressing the 6
button. The track to be erased is repeatedly
played.
Turn the JOG dial (or press the 4 or
3
¢ button) to select the track number to
be erased.

Erasing All the Tracks (ALL ERASE Function)

Use the unit to carry out this function.
1 In Stop mode, press the EDIT/ENTER button and turn the JOG dial until "ALL ERASE?"
is displayed.
2 Press the SET button.
"ERASE OK? PUSH ENTER" appears.
3 Press the EDIT/ENTER button.
"COMPLETE" appears, indicating successful erasing.
All the tracks in the MD are erased and "BLANK DISC" is displayed.
• When you turn off the power by pressing the 7/CHARGE button, "UTOC Writing" will be displayed and the
edited contents are written.
To cancel the operation, press the 7/CHARGE button in step 1 or 2.
Track to moved
Track to be erased
Turn the JOG dial (or press the 4 or
5
¢ button) to select the destination to
which the track is to be moved.
Track to be moved
• If you are playing back the MD, the destination
track is repeatedly played.
6 Press the SET button.
"PUSH ENTER" appears.
7 Press the EDIT/ENTER button.
"COMPLETE" and "TOC" appear, indicating suc-
cessful recording.
• When you turn off the power by pressing the 7/
CHARGE button, "UTOC Writing" will be displayed
and the edited contents are written. (The "TOC" indi-
cator goes out.)
To cancel the operation, press the 7/CHARGE button
in step 1 through 6 until the display returns to the origi-
nal display.
4 Press the SET button.
"ERASE OK? PUSH ENTER" appears.
5 Press the EDIT/ENTER button.
"COMPLETE" appears, indicating successful eras-
ing.
The selected track is erased and the track number
is decreased by 1.
• When you turn off the power by pressing the 7/
CHARGE button, "UTOC Writing" will be displayed
and the edited contents are written.
To cancel the operation, press the 7/CHARGE button
in step 1 through 4 until the display returns to the origi-
nal display.
Destination track
10