Dividing Tracks (Divide Function); Joining Tracks (Join Function) - JVC XM-R700SLE Instructions Manual

Jvc xm-r700sle minidisc players: user guide
Table of Contents

Advertisement

Dividing Tracks (DIVIDE Function)

Use the unit to carry out this function.
1
In Stop mode, press the EDIT/ENTER button and turn the JOG dial until "DIVIDE?" is displayed.
Press the SET button and then press the 6 button.
2
Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be divided.
3
4
Press the SET button at the point where the track is to be divided.
• The recording lasting for 4 seconds starting where the track was divided is repeatedly played for your refer-
ence.
• Movement is possible within the POSITION-128 to +128 range (the following period of time before and after
the position).
Recording mode SP:
Recording mode MONO or LP2: About 16 seconds
Recording mode LP4:
To move the point, turn the JOG dial while listening the music.
5
Press the EDIT/ENTER button.
"COMPLETE" and "TOC" appear, indicating successful recording.
• The selected track is divided into two tracks and the track number will increase by 1.
• When you turn off the power by pressing the 7/CHARGE button, "UTOC Writing" will be displayed and the
edited contents are written. (The "TOC" indicator goes out.)
To cancel the operation, press the 7/CHARGE button in step 1 through 4.

Joining Tracks (JOIN Function)

Use the unit to carry out this function.
1
In Stop mode, press the EDIT/ENTER button and turn the JOG dial until "JOIN?" is dis-
played.
2
Press the SET button.
• You can listen to the track by pressing the 6 button. The selected track is repeatedly played.
Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be joined.
3
4
Press the SET button.
"PUSH ENTER" appears.
5
Press the EDIT/ENTER button.
"COMPLETE" and "TOC" appear, indicating successful recording.
The selected track and the previous track are joined and the track number is decreased by 1.
• When you turn off the power by pressing the 7/CHARGE button, "UTOC Writing" will be displayed and the
edited contents are written. (The "TOC" indicator goes out.)
To cancel the operation, press the 7/CHARGE button in step 1 through 4.
Notes
• The tracks recorded in different recording modes cannot be joined. (For example, SP and LP2.)
• The track recorded with the analog input and that recorded with the digital input cannot be joined.
JOG dial
About 8 seconds
About 32 seconds
JOG dial
Track to be joined
Playing time
Track to be divided
Selected track
Selected track
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xm-r700sl

Table of Contents