Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stahl ProVicom MT-65
Summary of Contents for Stahl ProVicom MT-65
- Page 1 Operating Instructions ProVicom MT-65, MT-125 R. STAHL HMI Systems GMBH Im Gewerbegebiet Pesch 14 50767 Köln Version Issue: 21.07.2008 © R. STAHL HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 1 of 15...
-
Page 2: Table Of Contents
Dip switch settings S1 and S3 Maintenance, service Servicing Troubleshooting Disposal 9.1.1 ROHS directive 2002/95/EC 9.1.2 China ROHS Certificates 10.1 Provicom MT-65, MT-125 10.1.1 Declaration of EC conformity Release notes © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 2 of 15... -
Page 3: Preface
4 freely controllable LEDs and 16 function keys with LEDs in the frontplate MT-125 4 freely controllable LEDs and 12 function keys with LEDs in the frontplate Real time clock and data retention capacitor are buffered. © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 3 of 15... -
Page 4: Product Identification
Device category 3 (normal protection type) Device group II (for all devices NOT used underground or in mines and thus NOT surrounded by mine gas or flammable dust particles) © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 4 of 15... -
Page 5: For Zone
Ta = -10°C to +60°C, the surface temperature will not exceed +75°C. • When device operation ambient temperature range Ta = -10°C to +50°C, the surface temperature will not exceed +65°C. © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 5 of 15... -
Page 6: Special Conditions
2.4.1.1 Note concerning use in Zone 22 Note: During assembly and operation of the operator interface electrostatic surface voltages must not exceed those caused by manual rubbing. © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 6 of 15... -
Page 7: Power Supply
RS-422 and Profibus-DP interface MT-xxx- RS422-MPI RS-422 and MPI interface MT-xxx-RS RS interface for barcode or proximity reader MT-xxx-WCR WCR interface for Wiegand Effect reader © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_ en_1_7.doc / 21.07.2008 Page 7 of 15... -
Page 8: Installation And Operation
No changes may be made to the devices or their components that compromise explosion protection. The devices may only be installed and operated in an undamaged, dry and clean condition. © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 8 of 15... -
Page 9: Assembly And Disassembly
131.0 ± 0.5 mm max. 80 mm up to 10 mm MT-125 300.0 ± 0.5 mm 180.0 ± 0.5 mm max. 80 mm up to 10 mm © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 9 of 15... -
Page 10: Operation
The error output (relay contact) must NOT be connected if the operator interfaces are installed in zone 2. X14 Plug Definition Connection Version RxD/TxD-P Communication L2DP Profibus-DP M5V2 P5V2 RxD/TxD-N Version RxD/TxD-P Communication RTS/AS P5V2 RxD/TxD-N RTS PG © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 10 of 15... -
Page 11: Dip Switch Settings S1 And S3
RS-4xx Terminating bus resistor and termination switched off RS-4xx Terminating bus resistor and termination switched on RS-4xx Terminating bus resistor and termination switched off © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 11 of 15... -
Page 12: Maintenance, Service
Repairs may only be carried out by specially trained staff who are familiar with all basic conditions of the applicable user regulations and – if requested – have been authorized by the manufacturer. © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 12 of 15... -
Page 13: Disposal
Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 13 of 15... -
Page 14: Certificates
Certificates Operating Instructions ProVicom 10 Certificates 10.1 Provicom MT-65, MT-125 10.1.1 Declaration of EC conformity © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 14 of 15... -
Page 15: Release Notes
• Replacement of EC - Declaration of Conformity • Changing of the definition from the type code to the actual one • Changing information to BGI 547 • Formal improvement © R. Stahl HMI Systems GmbH / OperatingInstruction_Provicom_Falcon_en_1_7.doc / 21.07.2008 Page 15 of 15...
Need help?
Do you have a question about the ProVicom MT-65 and is the answer not in the manual?
Questions and answers