Interface F (Optical Indicator Interface); Functional Description - FALCOM TANGO55/i Hardware Description

TANGO55/ & TANGO56/
I
Figure 6: SIM interface (interface E)

4.1.6 Interface F (Optical indicator interface)

The actual state of the TANGO55/i and TANGO56/i is displayed by two LED's on
interface F of the unit (for more details see chapter
Figure 7: Status indicator of modem

4.2 Functional description

The GSM/GPRS modem TANGO55/i and TANGO56/i are mobile stations for the
transmission of voice, data and fax calls as well as SMS in GSM/GPRS networks.
The GSM/GPRS modems TANGO55/i and TANGO56/i consist of the following
components:
• GSM/GPRS transceiver
• Power supply unit
• Serial link (V.24) for data transmission and control
• GPRS Class B, Class 2 or Class 10.
If the GSM/GPRS modem is registered in the network, it acts just like a regular
fax/data modem. To control the GSM modem there is an advanced set of AT-
commands according to GSM ETSI 07.07 and 07.05 implemented. The two LED's on
the top of Interface C are showing the state of TANGO55/i and TANGO56/i. The
yellow LED signals the actual connection of the modem (interface B or C) and the
green LED signals power connection, GSM/GPRS network, a "RESET" function and
"SOFT-ON " procedure.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
I
4.2 Functional description).
V 1.03
ERSION
Page 25