Table of Contents
Advertisement
Parameter Menus
Decode UPC/EAN Supplemental Redundancy
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts
the number of times a symbol without supplementals is decoded before
transmission. The range is from two to 20 times. Five or above is recommended
when decoding a mix of UPC/EAN symbols with and without supplementals,
and the autodiscriminate option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two
numeric bar codes beginning on page 5-98. Single digit numbers must have a
leading zero. If you make an error, or wish to change your selection, scan
CANCEL on page 5-100.
DECODE UPC/EAN
SUPPLEMENTAL REDUNDANCY
5-27
Advertisement
Table of Contents
