Decode Upc/Ean Supplemental Redundancy - Symbol MiniScan MS-804FZY Integration Manual

MS-804FZY and MS-904HS Integration Guide

Decode UPC/EAN Supplemental Redundancy

Parameter # 50h
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number
of times (from 2 to 30) a symbol without supplementals is decoded before transmission.
Five or above is recommended when decoding a mix of UPC/EAN symbols with and
without supplementals, and the autodiscriminate option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two numeric bar
codes beginning on page 7-105. Enter a leading zero for single digit numbers. To change
the selection or to cancel an incorrect entry, scan the Cancel bar code on page 7-107.
Decode UPC/EAN
Supplemental Redundancy
7-32