Onboard Headers And Connectors - ASROCK D1622D4I User Manual

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.
Serial ATA3 Connectors
(SATA_4)
(see p.6, No. 16)
(SATA_5)
(see p.6, No. 17)
Serial ATA3 DOM
Connector
(SATA_5)
(see p.6, No. 16)
Mini-SAS HD Connector
(SATA_0_3)
(see p.6, No. 22)
Chassis Speaker Header
(4-pin SPEAKER1)
(see p.6, No. 10)
TPM Header
(13-pin TPM1)
(see p.6, No. 12)
18
SATA_4
SATA_5
SATA_4
SATA_0_3
DUMMY SPEAKER
1
+5V DUMMY
1
These two Serial ATA3 (SATA3)
connectors support SATA
data cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate.
The SATA3 DOM
connector supports both
a SATA DOM (Disk-On-
Module) and a SATA
data cable for internal
storage devices.
The connector supports
MiniSAS-to-SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate.
Please connect the chassis
speaker to this header.
This connector supports Trusted
Platform Module (TPM) system,
which can securely store keys,
digital certificates, passwords,
and data. A TPM system also
helps enhance network security,
protects digital identities, and
ensures platform integrity.