1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. D1541D4I-2L2T
  6. User manual

ASROCK D1541D4I-2L2T User Manual

Server/workstation
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
D1521D4I
D1541D4I
D1541D4I-2L2T

User Manual

Version 1.0
Published February 2016
Copyright©2016 ASRock Rack INC. All rights reserved.

Advertisement

Table of Contents
loading

Related Manuals for ASROCK D1541D4I-2L2T

Summary of Contents for ASROCK D1541D4I-2L2T

  • Page 1: User Manual

    D1521D4I D1541D4I D1541D4I-2L2T User Manual Version 1.0 Published February 2016 Copyright©2016 ASRock Rack INC. All rights reserved.

  • Page 2: Copyright Notice

    In no event shall ASRock Rack, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock Rack has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Page 3 Contact Information If you need to contact ASRock Rack or want to know more about ASRock Rack, you’re welcome to visit ASRock Rack’s website at www.ASRockRack.com; or you may contact your dealer for further information. ASRock Rack Incorporation 6F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,...

  • Page 4: Table Of Contents

    Contents Chapter 1 Introduction Package Contents Specifications Unique Features Motherboard Layout Onboard LED Indicators I/O Panel Block Diagram Chapter 2 Installation Screw Holes Pre-installation Precautions Installation of Memory Modules (DIMM) Expansion Slots (PCI Express Slots) Jumper Setup Onboard Headers and Connectors Unit Identification purpose LED/Switch Driver Installation Guide Dual LAN and Teaming Operation Guide...
  • Page 5 Main Screen Advanced Screen 3.3.1 ACPI Configuration 3.3.2 Configure Super IO Settings 3.3.3 Serial Port Console Redirection 3.3.4 CSM Configuration 3.3.5 USB Configuration 3.3.6 System Configuration 3.3.7 Hard Disk S.M.A.R.T Settings 3.3.8 3rd Storage Configuration 3.3.9 NVMe Configuration 3.3.9 H/W Monitor 3.3.10 WHEA Configuration 3.3.11 Instant Flash IntelRCSetup...
  • Page 6 Security Screen Boot Screen Event Logs Exit Screen Chapter 4 Software Support Install Operating System Support CD Information 4.2.1 Running The Support CD 4.2.2 Drivers Menu 4.2.3 Utilities Menu 4.2.4 Contact Information Chapter 5 Troubleshooting Troubleshooting Procedures Technical Support Procedures Returning Merchandise for Service Chapter 6: Net Framework Installation Guide Installing .Net Framework 3.5.1 (For Server 2008 R2)

  • Page 7: Chapter 1 Introduction

    In case any modifications of this manual occur, the updated version will be available on ASRock Rack website without further notice. You may find the latest memory and CPU support lists on ASRock Rack website as well. ASRock Rack’s Website: www.ASRockRack.com If you require technical support related to this motherboard, please visit our website for specific information about the model you are using.

  • Page 8: Specifications

    - Dual Channel DDR4 memory technology - Support 2400/2133 RDIMM / UDMM / ECC UDIMM memory* Max. capacity of system memory : RDIMM/128GB, UDIMM/64GB *Only D1541D4I and D1541D4I-2L2T support DDR4 2400. Voltage 1.2V Expansion Slot PCIe 3.0 x 16 1 slot  Storage...
  • Page 9 128Mb AMI UEFI Legal BIOS - Plug and Play (PnP) - ACPI 2.0 Compliance Wake Up Events BIOS Features - SMBIOS 2.8.0 Support - ASRock Rack Instant Flash Hardware Monitor - CPU Temperature Sensing Temperature - System Temperature Sensing - System Inlet Temperature Sensing...
  • Page 10 Support OS Microsoft® Windows® - Server 2008 R2 SP1 (64 bit) - Server 2012 (64 bit) - Server 2012 R2 (64 bit) Linux® - CentOS 6.6 (32 / 64 bit) / 7. 0 (64 bit) (only supports AHCI mode) - SUSE Enterprise Linux Server 11 SP3 (32 / 64 bit) / 12 (64 bit) - FreeBSD 10.1 (32 / 64 bit) - Fedora Core 22 (64 bit)

  • Page 11: Unique Features

    . With this utility, you can press the <F6> key during the POST or the <F2> key to enter into the BIOS setup menu to access ASRock Rack Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility.

  • Page 12: Motherboard Layout

    1.4 Motherboard Layout D1541D4I-2L2T 17.0cm (6.7 in) USB 3.0 IPMI ATXPWR1 T: USB2 PSU_SMB1 B: USB1 ATX12V1 FRNT_FAN1 CH0_A1 ( DDR4, 64 bit, 288-pin module, Blue) CH0_A2 ( DDR4, 64 bit, 288-pin module, White) UID1 CH1_B1 ( DDR4, 64 bit, 288-pin module, Blue)
  • Page 13 D15X1D4I Series Description PSU SMBus (PSU_SMB1) DC-IN 12V Power Connector (ATX12V1)* ATX Power Connector (ATXPWR1)* Front Fan Connector (FRNT_FAN1) 2 x 288-pin DDR4 DIMM Slots (CH0_A1, CH1_B1) 2 x 288-pin DDR4 DIMM Slots (CH0_A2, CH1_B2) CPU Fan Connector (CPU_FAN1) HDD Power Connector (HDD_PWR1) LAN LED Connector (LED_LAN3_4) TPM Header (TPM1) USB 2.0 Header (USB_1)
  • Page 14 D1541D4I 17.0cm (6.7 in) USB 3.0 IPMI ATXPWR1 T: USB2 PSU_SMB1 B: USB1 ATX12V1 FRNT_FAN1 CH0_A1 ( DDR4, 64 bit, 288-pin module, Blue) CH0_A2 ( DDR4, 64 bit, 288-pin module, White) UID1 CH1_B1 ( DDR4, 64 bit, 288-pin module, Blue) CH1_B2 ( DDR4, 64 bit, 288-pin module, White)
  • Page 15 D15X1D4I Series D1521D4I 17.0cm (6.7 in) USB 3.0 IPMI ATXPWR1 T: USB2 PSU_SMB1 B: USB1 ATX12V1 FRNT_FAN1 CH0_A1 ( DDR4, 64 bit, 288-pin module, Blue) CH0_A2 ( DDR4, 64 bit, 288-pin module, White) UID1 CH1_B1 ( DDR4, 64 bit, 288-pin module, Blue) CH1_B2 ( DDR4, 64 bit, 288-pin module, White)
  • Page 16 Description PSU SMBus (PSU_SMB1) DC-IN 12V Power Connector (ATX12V1)* ATX Power Connector (ATXPWR1)* Front Fan Connector (FRNT_FAN1) 2 x 288-pin DDR4 DIMM Slots (CH0_A1, CH1_B1) 2 x 288-pin DDR4 DIMM Slots (CH0_A2, CH1_B2) CPU Fan Connector (CPU_FAN1) HDD Power Connector (HDD_PWR1) TPM Header (TPM1) USB 2.0 Header (USB_1) Non Maskable Interrupt Button (NMI_BTN1)

  • Page 17: Onboard Led Indicators

    D15X1D4I Series 1.5 Onboard LED Indicators USB 3.0 IPMI ATXPWR1 T: USB1 FAN_LED1 PSU_SMB1 B: USB2 ATX12V1 FRNT_FAN1 CH0_A1 ( DDR4, 64 bit, 288-pin module, Blue) CH0_A2 ( DDR4, 64 bit, 288-pin module, White) UID1 CH1_B1 ( DDR4, 64 bit, 288-pin module, Blue) CH1_B2 ( DDR4, 64 bit, 288-pin module, White)

  • Page 18: I/O Panel

    1.6 I/O Panel D1541D4I-2L2T No. Description No. Description Dedicated IPMI LAN Port* LAN RJ-45 Port (LAN1)* USB 3.0 Ports (USB3_12) 10G LAN RJ-45 Port (LAN4)** UID Switch/LED (UID_SW_LED1) 10G LAN RJ-45 Port (LAN3)** LAN RJ-45 Port (LAN2)* VGA Port (VGA1) D1541D4I / D1521D4I No.
  • Page 19 **There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port LAN Port (LAN3, LAN4) LED Indications 10G For D1541D4I-2L2T Activity / Link LED Speed LED Status Description Status...

  • Page 20: Block Diagram

    1.7 Block Diagram D1541D4I-2L2T DDR4 ChannelA DDR4 2133/2400 PCIe x16 PCIe slot7 DDR4 ChannelB DDR4 2133/2400 SATA_4 Header SATA3 6G Normal SATA / SATA-DOM Mini-SAS(8087) Header SATA3 6G SATA_0_3 SATA_5 Header SATA3 6G Front Header USB 2.0 (1 port) Intel...
  • Page 21 D15X1D4I Series D1541D4I / D1521D4I DDR4 ChannelA DDR4 2133/2400 PCIe x16 PCIe slot7 DDR4 ChannelB DDR4 2133/2400 SATA_4 Header SATA3 6G Normal SATA / SATA-DOM Mini-SAS(8087) Header SATA3 6G SATA_0_3 SATA_5 Header SATA3 6G Front Header USB 2.0 (1 port) Intel Intel Processor PCIe x1...

  • Page 22: Chapter 2 Installation

    Chapter 2 Installation This is a Mini-ITX form factor (6.7'' x 6.7'', 17.0 cm x 17.0 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components.

  • Page 23: Installation Of Memory Modules (Dimm)

    D15X1D4I Series 2.3 Installation of Memory Modules (DIMM) This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.

  • Page 25: Expansion Slots (Pci Express Slots)

    D15X1D4I Series 2.4 Expansion Slots (PCI Express Slots) There is 1 PCI Express slots on this motherboard. PCIE slot: PCIE1 (PCIE 3.0 x16 slot) is used for PCI Express x16 lane width cards. Installing an expansion card Step 1. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged.

  • Page 26: Jumper Setup

    5V power supply SATA DOM (SATA_4) does NOT require 5V power supply NCSI Mode Jumper (3-pin NCSI_SEL1) *Supports D1541D4I-2L2T only NCSI is set LAN1 (i210) NCSI is set to LAN3 (X557) (Default) CPU PECI Mode Jumper (3-pin PECI1) CPU PECI connected to PCH CPU PECI connected to...

  • Page 27: Onboard Headers And Connectors

    D15X1D4I Series 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. *You can see p.6~8 for motherboard layout. Serial ATA3 Connectors These two Serial ATA3 (SATA_4)
  • Page 28 Chassis Speaker Header Please connect the chassis DUMMY SPEAKER (4-pin SPEAKER1) speaker to this header. DUMMY TPM Header This connector supports Trust- (17-pin TPM1) ed Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures...
  • Page 29 D15X1D4I Series System Panel Header This header accommodates PLED+ PLED- PWRBTN# (9-pin PANEL1) several system front panel functions. RESET# HDLED- HDLED+ PWRBTN (Power Switch): Connect to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch.
  • Page 30 Auxiliary Panel Header This header supports multiple (18-pin AUX_PANEL1) functions on the front panel, including front panel SMB, internet status indicator. A. Front panel SMBus connecting pin (6-1 pin FPSMB) This header allows you to connect SMBus (System Management Bus) equipment. It can be used for communication between peripheral equipment in the system, which has slower transmission rates, and power management equipment.
  • Page 31 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3. For more details, please refer to the Cooler QVL list on the ASRock Rack website. ATX Power Connector Please connect an ATX power (24-pin ATXPWR1) supply to this connector.
  • Page 32 LAN LED Connector for the front LAN status LAN3_ACT_P (LED_LAN3_4) indicator. LAN3_ACT_N *Supports D1541D4I-2L2T only Thermal Sensor Header Please connect the thermal (3-pin TR1) sensor cable to either pin 1-2 or pin 2-3 and the other end to the device which you wish to monitor its temperature.
  • Page 33 D15X1D4I Series RRXD1 Serial Port Header This COM header supports a DDTR#1 DDSR#1 (9-pin COM1) serial port module. CCTS#1 RRI#1 RRTS#1 TTXD1 DDCD#1...

  • Page 34: Unit Identification Purpose Led/Switch

    2.7 Unit Identification purpose LED/Switch With the UID button, You are able to locate the server you’re working on from behind a rack of servers. Unit Identification When the UID button on the purpose LED/Switch front or rear panel is pressed, (UID1) the front/rear UID blue LED indicator will be turned on.

  • Page 35: Dual Lan And Teaming Operation Guide

    D15X1D4I Series 2.9 Dual LAN and Teaming Operation Guide Dual LAN with Teaming enabled on this motherboard allows two single connections to act as one single connection for twice the transmission bandwidth, making data transmission more effective and improving the quality of transmission of distant images.

  • Page 36: M.2_Ssd (Ngff) Module Installation Guide

    2.10 M.2_SSD (NGFF) Module Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. This M.2_SSD (NGFF) Socket 3 can accommodate a M.2 PCI Express module up to Gen3 x4 (32 Gb/s) only.
  • Page 37 D15X1D4I Series Step 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 NUT2 NUT2 and 4 and go straight to Step 5 if you are going to use the default nut.

  • Page 38: Chapter 3 Uefi Setup Utility

    Chapter 3 UEFI Setup Utility 3.1 Introduction Th is section explains how to use the UEFI SETUP UTILITY to confi gure your system. Th e UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY when you start up the computer.

  • Page 39: Navigation Keys

    D15X1D4I Series 3.1.2 Navigation Keys Please check the following table for the function description of each navigation key. Navigation Key(s) Function Description Moves cursor left or right to select Screens Moves cursor up or down to select items + / - To change option for the selected items <Tab>...

  • Page 40: Main Screen

    3.2 Main Screen Once you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. The Main screen provides system overview information and allows you to set the system time and date.

  • Page 41: Advanced Screen

    D15X1D4I Series 3.3 Advanced Screen In this section, you may set the configurations for the following items: ACPI Configura- tion, Configure Super IO Settings, Serial Port Console Redirection, CSM Parameters, USB Configuration, System Configuration, Hard Disk S.M.A.R.T Settings, 3rd Storage Configu- ration, NVMe Configuration, H/W Monitor, WHEA Configuration and Instant Flash.

  • Page 42: Acpi Configuration

    3.3.1 ACPI Configuration PCIE Devices Power On Use this item to enable or disable PCIE devices to turn on the system from the power-soft- off mode. Ring-In Power On Use this item to enable or disable Ring-In signals to turn on the system from the power- soft-off mode.

  • Page 43: Configure Super Io Settings

    D15X1D4I Series 3.3.2 Configure Super IO Settings Serial Port 1 Configuration Use this item to configure the onboard serial port 1. Select and enter the "Serial Port 1 Configuration" and you will see the followings: Serial Port Use this item to enable or disable the onboard serial port. Serial Port Address Use this item to select an optimal setting for Super IO device.

  • Page 44: Serial Port Console Redirection

    3.3.3 Serial Port Console Redirection COM1 / SOL Console Redirection Use this option to enable or disable Console Redirection. If this item is set to Enabled, you can select a COM Port to be used for Console Redirection. Console Redirection Settings Use this option to configure Console Redirection Settings, and specify how your computer and the host computer to which you are connected exchange information.
  • Page 45 D15X1D4I Series computer and the client computer must be the same. Long or noisy lines may require lower transmission speed. The options include [9600], [19200], [57600], [38400] and [115200]. Data Bits Use this item to set the data transmission size. The options include [7] and [8] (Bits). Parity Use this item to select the parity bit.

  • Page 46: Console Redirection

    Messages. Serial Port for Out-of-Band Management/Windows Emergency Management Services (EMS) Console Redirection Use this option to enable or disable Console Redirection. If this item is set to Enabled, you can select a COM Port to be used for Console Redirection. Console Redirection Settings Use this option to configure Console Redirection Settings, and specify how your computer and the host computer to which you are connected exchange information.

  • Page 47: Csm Configuration

    D15X1D4I Series 3.3.4 CSM Configuration Boot Option Filter This option controls Legacy/UEFI ROMs priority. Launch Storage OpROM Policy Select UEFI only to run those that support UEFI option ROM only. Select Legacy only to run those that support legacy option ROM only. Select Do not launch to not execute both legacy and UEFI option ROM.

  • Page 48: Usb Configuration

    3.3.5 USB Configuration Intel USB3.0 Mode Use this item to select the mode of operation of Intel USB 3.0 controller. Configuration options: [Enabled], [Disabled], [Auto] and [Smart Auto]. If [Auto] is selected, all USB ports work as USB3.0 after boot to OS. If [Smart Auto] is selected, all USB ports work as USB3.0 after boot to OS and work as USB2.0 in deep sleep stages.

  • Page 49: System Configuration

    Onboard LAN2 This allows you to enable or disable the Onboard LAN2 features. Onboard LAN3 & LAN4 (For D1541D4I-2L2T only) This allows you to enable or disable the Onboard LAN3 & LAN4 features. Above 4G Decoding Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space (only if the system supports 64 bit PCI decoding).
  • Page 50 is selected, the AC/power remains off when the power recovers. If [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recovers. If [Last State] is selected, it will recover to the state before AC/power loss. SR-IOV Support If system has SR-IOV capable PCIe Devices, this option Enables or Disables Single Root IO Virtualization Support.

  • Page 51: Hard Disk S.m.a.r.t Settings

    D15X1D4I Series 3.3.7 Hard Disk S.M.A.R.T Settings Hard Disk S.M.A.R.T. Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. Configuration options: [Disabled] and [Enabled].

  • Page 52: 3Rd Storage Configuration

    3.3.8 3rd Storage Configuration In this section, you may set the configurations or see the information of the connected 3rd storage device.

  • Page 53: Nvme Configuration

    D15X1D4I Series 3.3.9 NVMe Configuration The NVMe Configuration displays the NVMe controller and Drive information.

  • Page 54: H/W Monitor

    3.3.9 H/W Monitor In this section, it allows you to monitor the status of the hardware on your system, includ- ing the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis fan speed, and the critical voltage. CPU_FAN1 This allows you to set the CPU fan1’s speed.
  • Page 55 D15X1D4I Series Smart Fan Temp Control Smart Fan Temp x (x means 1 to 11 stage) This allows you to set temperature for each stage. Watch Dog Timer This allows you to enable or disable the Watch Dog Timer. The default value is [Disabled].

  • Page 56: Whea Configuration

    3.3.10 WHEA Configuration WHEA Support Use this item to enable or disable Windows Hardware Error Architecture. System Error Use this item to enable or disable System Error feature. When it is set to [Enabled], you can configure Memory Error and PCIE Error log features. Memory Error Memory enabling and logging setup option.
  • Page 57 D15X1D4I Series Fatal Error Enable Use this item to enable or disable PCIe Ftal errors.

  • Page 58: Instant Flash

    3.3.11 Instant Flash Instant Flash is a UEFI flash utility embedded in Flash ROM. This convenient UEFI update tool allows you to update system UEFI without entering operating systems ® first like MS-DOS or Windows . Just save the new UEFI file to your USB flash drive, floppy disk or hard drive and launch this tool, then you can update your UEFI only in a few clicks without preparing an additional floppy diskette or other compli- cated flash utility.

  • Page 59: Intelrcsetup

    D15X1D4I Series 3.4 IntelRCSetup In this section, you may set the configurations for the following items: Processor Configu- ration, Advanced Power Management Configuration, Memory Configuration, IIO Con- figuration, PCH Configuration and Server ME Configuration.

  • Page 60: Processor Configuration

    3.4.1 Processor Configuration Per-Socket Configuration Change Per-Socket Settings. CPU Socket 1 Configuration Active Processor Cores Enter the number of cores to be enabled. 0 means all cores. Intel Hyper Threading Technology Intel Hyper Threading Technology allows multiple threads to run on each core, so that the overall performance on threaded software is improved.
  • Page 61 D15X1D4I Series Enable Intel TXT Support Enable Intel Trusted Execution Technology configuration. Please disable "EX DFX Features" when TXT is enabled. Intel Virtualization Technology Intel Virtualization Technology allows a platform to run multiple operating systems and applications in independent partitions, so that one computer system can function as multiple virtual systems.

  • Page 62: Advanced Power Management Configuration

    3.4.2 Advanced Power Management Configuration Intel SpeedStep Technology Intel SpeedStep technology is Intel’s new power saving technology. Processors can switch between multiple frequencies and voltage points to enable power saving. The default value is [Enabled]. Configuration options: [Enabled] and [Disabled]. If you install Windows® Vista / 7 / 8 and want to enable this function, please set this item to [Enabled].
  • Page 63 D15X1D4I Series CPU C6 State Support Enable C6 deep sleep state for lower power consumption. CPU Thermal Throttling Enable CPU internal thermal control mechanisms to keep the CPU from overheating.

  • Page 64: Memory Configuration

    3.4.3 Memory Configuration Enforce POR Enable to enforce POR restrictions for DDR4 frequency and voltage programming. DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assign the appropriate frequency automatically. ECC Support Use this item to enable or disable DDR ECC Support. Memory Information Displays memory topology with DIMM population information.

  • Page 65: Iio Configuration

    D15X1D4I Series 3.4.4 IIO Configuration PCIE7 Link Width This allows you to select PCIE7 Link Width. The default value is [x16]. PCIE7 Link Speed This allows you to select PCIE7 Link Speed. The default value is [Auto]. PCI-E ASPM Support This option enables or disables the ASPM support for all downstream devices.

  • Page 66: Pch Configuration

    3.4.5 PCH Configuration PCH SATA Configuration SATA devices and settings SATA Controller Use this item to enable or disable SATA Controller. SATA Mode Selection Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. SATA Aggressive Link Power Mgmt Use this item to enable or disable SALP.
  • Page 67 D15X1D4I Series Configure as External SATA External SATA configuration. Spin Up Device If enabled for any of ports, Staggered Spin Up will be performed and only the drives which have this option enabled will spin up at boot. Otherwise all drives spin up at boot. SATA Device Type Identify the SATA port connected to Solid State Drive or Hard Disk Drive.

  • Page 68: Server Me Configuration

    3.4.6 Server ME Configuration Spread Spectrum Use this item to select spread specturm mode.

  • Page 69: Server Mgmt

    D15X1D4I Series 3.5 Server Mgmt Wait For BMC Wait For BMC response for specified time out. In PILOTII, BMC starts at the same time when BIOS starts during AC power ON. It takes around 30 seconds to initialize Host to BMC interfaces.

  • Page 70: System Event Log

    3.5.1 System Event Log SEL Components Change this to enable ro disable all features of System Event Logging during boot. Erase SEL Use this to choose options for earsing SEL. When SEL is Full Use this to choose options for reactions to a full SEL. Log EFI Status Codes Use this item to disable the logging of EFI Status Codes or log only error code or only progress or both.

  • Page 71: Bmc Network Configuration

    D15X1D4I Series 3.5.2 BMC Network Configuration Lan Channel (Failover) Manual setting IPMI LAN If [No] is selected, the IP address is assigned by DHCP. If you prefer using a static IP address, toggle to [Yes], and the changes take effect after the system reboots. The default value is [No].
  • Page 72 The default login information for the IPMI web interface is: Username: admin Password: admin For more instructions on how to set up remote control environment and use the IPMI man- agement platform, please refer to the IPMI Configuration User Guide or go to the Support website at: http://www.asrockrack.com/support/ipmi.asp BMC Mac Backup Tool Use this to restore BMC Mac from the backup.

  • Page 73: Security Screen

    D15X1D4I Series 3.6 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. Supervisor Password Set or change the password for the administrator account. Only the administrator has authority to change the settings in the UEFI Setup Utility.

  • Page 74: Boot Screen

    3.7 Boot Screen In this section, it will display the available devices on your system for you to configure the boot settings and the boot priority. Boot Option #1 Use this item to set the system boot order. Boot Option #2 Use this item to set the system boot order.
  • Page 75 D15X1D4I Series Bootup Num-Lock If this item is set to [On], it will automatically activate the Numeric Lock function after boot-up. Boot Beep Select whether the Boot Beep should be turned on or off when the system boots up. Please note that a buzzer is needed.

  • Page 76: Event Logs

    3.8 Event Logs Change Smbios Event Log Settings This allows you to configure the Smbios Event Log Settings. View Smbois Event Log This allows you to view the Smbios Event Log.

  • Page 77: Exit Screen

    D15X1D4I Series 3.9 Exit Screen Save Changes and Exit When you select this option, the following message “Save configuration changes and exit setup?” will pop-out. Select [Yes] to save the changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option, the following message “Discard changes and exit setup?”...

  • Page 78: Chapter 4 Software Support

    4.2.4 Contact Information If you need to contact ASRock Rack or want to know more about ASRock Rack, welcome to visit ASRock Rack’s website at http://www.ASRockRack.com; or you may contact your...

  • Page 79: Chapter 5 Troubleshooting

    D15X1D4I Series Chapter 5 Troubleshooting 5.1 Troubleshooting Procedures Follow the procedures below to troubleshoot your system. Always unplug the power cord before adding, removing or changing any hardware com- ponents. Failure to do so may cause physical injuries to you and damages to motherboard components.
  • Page 80 1. Verify if the battery on the motherboard provides ~3VDC. Install a new battery if it does not. 2. Confirm whether your power supply provides adaquate and stable power. Other problems... 1. Try searching keywords related to your problem on ASRock Rack’s FAQ page: http://www.asrockrack.com/support...

  • Page 81: Technical Support Procedures

    D15X1D4I Series 5.2 Technical Support Procedures If you have tried the troubleshooting procedures mentioned above and the problems are still unsolved, please contact ASRock Rack’s technical support with the following information: 1. Your contact information 2. Model name, BIOS version and problem type 3.

  • Page 82: Chapter 6: Net Framework Installation Guide

    Chapter 6: Net Framework Installation Guide ® To let Intel RSTe works properly, it is required to install Net Framework. Please follow the ® ® steps below to enable “.Net Framework” feature on Microsoft Windows Server 2008 R2. 6.1 Installing .Net Framework 3.5.1 (For Server 2008 R2) 1.
  • Page 83 D15X1D4I Series 3. Check the box next to .Net Framework 3.5.1 and then click Next. 4. Click Next to continue.
  • Page 84 5. Click Install to start installing .Net Framework 3.5.1. 6. After the installation completes, click Close.

This manual is also suitable for:

D1541d4iD1521d4i

Table of Contents