Table of Contents
Advertisement
8
EN
Plug & Play
Auto Clock Set/Auto Tuner Set
ATTENTION
If you use a cable box, Plug & Play will not function; set
the clock and tuner channels manually. (
IMPORTANT
Don't press any buttons on the VCR or remote while
Plug & Play is in progress.
If you perform Plug & Play successfully, there's no need to
perform the Clock (
procedures. If, however, you want to add or delete
channels, refer to "Add Or Delete A Channel" on page 15.
During Initial Auto Clock Set
"Auto" blinks.
* If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.
pg.11 – 15)
pg. 11) and Tuner (
pg. 14)
During Auto Channel Set
The channel numbers are displayed
as they are scanned and set.
The Plug & Play function sets the clock and tuner channels
automatically when power is first connected to the VCR. The
antenna cable must be connected for the Plug & Play function.
The time and date can be set automatically from clock setting
data that is transmitted by one of the regular TV broadcast
channels. We call this TV channel the "Host Channel" and it is
a PBS channel in your area.
PLUG & PLAY SETUP
1
Connect the antenna cable to the VCR (
connect the VCR's power plug to an AC outlet. Do not
power on the VCR. The clock and tuner channels will
be set automatically.
NOTES:
Auto clock set is performed first. The auto clock set
function scans all the channels received by your VCR
to find the Host Channel and then sets the clock.
"Auto" blinks on the front display panel during Auto
clock set.
JOG
SHATTLE
Auto channel set is performed next. The auto channel
set function scans all the channels that are receivable
by your VCR. It then automatically assigns each
receivable channels to the CH 5 ∞ (+/–) buttons. It
skips non-receivable channels. During auto channel
set the channel numbers are displayed as they are
scanned and set.
When Plug & Play has been completed successfully the
correct time is displayed.
If an incorrect time or "– –:– –" appears on the display
panel, see "What To Do If Plug & Play Has Failed" on
next page.
INITIAL SETTINGS
pg. 6). Then
Plug & Play Completed
The current time (including
AM/PM) is displayed.
Advertisement
Table of Contents
