Table of Contents
Advertisement
28
EN
REVIEW
1
4
7
C.RESET
1
REW
STOP
Instant ReView
At the press of a button, you can power up your VCR, rewind the
tape and begin viewing the most recent timer-recorded program.
ACTIVATE INSTANT REVIEW
1
After ensuring that the Timer mode is disengaged, press
REVIEW.
The power comes on and the VCR rewinds to the index
code indicating the start of the last timer-recorded
program, then begins playback automatically.
You can access a program 2–9 index codes away
from the current position on the tape. If, for example,
you have 5 programs recorded and you want to watch
the third one, press REVIEW three times.
If necessary press REW or FF when play starts to
search visually to find the very beginning of the
desired program.
If the tape is already rewound when REVIEW is
pressed, it will play the tape from the beginning. It
will not fast forward to an index code.
The Instant Review function will also operate if the
VCR's power is on.
PLAYBACK AND RECORDING FEATURES (cont.)
PAUSE
POWER
2
3
2
5
6
8
9
TIMER
0
4
FF
PAUSE
SHUTTLE PLUS
Repeat Playback
START REPEAT
1
Press and hold PLAY (until "
display panel) during playback, then release.
JOG
SHATTLE
The entire tape is played back 50 times.
STOP REPEAT
2
To stop, press STOP at any time.
NOTE:
Pressing PLAY, REW, FF, PAUSE or SHUTTLE PLUS
™ or £ also stops Repeat Playback.
Counter Reset
RESET COUNTER TO ZERO
1
Press C.RESET.
NOTE:
By pressing the DISPLAY button, you can change the
display to show the counter reading, channel number,
clock time or tape remaining time. (Channel number is
not displayed during playback.)
Tape Position Indicator
The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
use the SHUTTLE ring, or perform
an Index Search or Instant ReView.
The position of "
"B" (Beginning) or "E" (End) shows
you where you are on the tape.
NOTES:
"SUPERIMPOSE" must be set to "ON", or the indicator will not
appear (
pg. 29).
It may take a few seconds for the Tape Position Indicator to be
displayed.
Next-Function Memory
The Next Function Memory "tells" the VCR what to do after
rewinding. Before continuing, ensure that the VCR is in stop
mode.
a– For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c– For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the
cassette's record safety tab is removed.
" blinks on the front
SP
VCR
+
B
" in relation to
+
+
E
COUNT
0:33:27
Advertisement
Table of Contents
