Table of Contents
Advertisement
Audio Dubbing
Audio cable
Audio component
(CD player etc.)
NOTES:
When monitoring the sound during Audio Dubbing, the
normal soundtrack is automatically selected. If you wish to
hear the Hi-Fi or mixed sound (Hi-Fi + Normal soundtracks),
refer to the "Select The Soundtrack" section (
select the soundtrack you wish to hear.
Audio dubbing stops automatically when the counter reaches
"0
00
00", and the VCR enters the Play mode. Check the
:
:
counter reading before dubbing.
Audio dubbing is also possible using the rear AUDIO IN
connectors.
Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
When playing back an audio-dubbed tape, refer to the "Select
The Soundtrack" section (
you wish to hear.
Picture may be distorted during Audio Dubbing Pause.
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
pg. 27) and
pg. 27) to select the soundtrack
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack. Use your VCR as the
recorder.
Normal
audio track
Pre-recorded tape
Video/Hi-Fi
audio track
Audio-dubbed tape
JOG
SHATTLE
MAKE CONNECTIONS
1
Connect an audio component to your VCR's AUDIO IN
L+ R connectors. *When connecting monaural
equipment, use only the VCR's AUDIO IN L connector.
SET RECORDER'S INPUT
MODE
2
Set to "AUX". Press the NUMBER key "0" and/or CH to
select depending on the connector being used – "L-1"
for the rear AUDIO/VIDEO IN connector, or "F-1" for
the front AUDIO/VIDEO IN connector.
LOCATE START POINT
3
Press PLAY to start playback of the tape in your VCR,
and press PAUSE when you find the point where you
want to start dubbing.
ENGAGE AUDIO DUBBING
4
Press A.DUB.
Your VCR enters the Audio Dubbing Pause mode.
("
" blinks, "
display panel.)
START DUBBING
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your VCR. Audio dubbing
begins at this point.
"
" blinks and "
display panel.
To stop dubbing temporarily, press PAUSE. Press PLAY
to resume dubbing.
END AUDIO DUBBING
6
Press STOP to stop the tape in your VCR, and engage
the audio component's Stop mode.
EN
" and "
" light up on the front
" is displayed on the front
49
Advertisement
Table of Contents
