Plug & Play; Nitial Settings - JVC HR-J4405UM Manual

6
EN
Plug & Play
Before starting...
● Connect the TV antenna cable to the ANT. IN jack on the
VCR and plug the power cord into the AC outlet.
● Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
MENU
Downloaded from: https://www.usersmanualguide.com/
POWER
1 2 3
2
4 5 6
7 8 9
0
4
1
OK
PUSH JOG
INITIAL SETTINGS
The Plug & Play function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear
when the POWER button is first pressed to power on the VCR
after you connect the power plug to an AC outlet.
IMPORTANT
● Don't press any buttons on the VCR or remote that are
not directly related to the step you are performing while
Plug & Play is in progress.
● If you perform Plug & Play successfully during
installation, there's no need to separately perform the
Language Select, Clock Set or Channel Set procedures,
but if adjustments become necessary they can be
performed as follows:
– To change the selected language
– To reset or adjust the time
– To add/delete channels manually
– To reset the tuner after moving to a different location
pg. 10
PERFORM PLUG & PLAY
SETUP
1
Press POWER.
● The Language Select screen appears.
SELECT LANGUAGE
2
Press CH 5 ∞ or PUSH
JOG % fi to move the
highlight bar (arrow) to
your desired language
(ENGLISH or ESPAÑOL),
then press OK or PUSH
JOG .
● The Clock Set screen
appears.
SET TIME
3
Press CH5 ∞ or PUSH
JOG% fi to set the hour,
then press OK or PUSH
JOG .
● Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
4
Press CH 5 ∞ or PUSH JOG % fi to set the date, then
press OK or PUSH JOG
● Press and hold either button to change the date by 15
days.
SET YEAR
5
Press CH5 ∞ or PUSH JOG% fi to set the year.
pg. 8
pg. 9
pg. 11
LANGUAGE SELECT
=ENGLISH
ESPAÑOL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 98
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
.