Warranty Information - Art Project Series User Manual

WARRANTY INFORMATION

Limited Warranty
Applied Research and Technology will provide warranty and service for this unit in accordance with the following
warrants:
Applied Research and Technology, (A R T) warrants to the original purchaser that this product and the
components thereof will be free from defects in workmanship and materials for a period of three years from the
date of purchase. Applied Research and Technology will, without charge, repair or replace, at its option, defective
product or component parts upon prepaid delivery to the factory service department or authorized service center,
accompanied by proof of purchase date in the form of a valid sales receipt.
Exclusions
This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized
alterations or repairs. This warranty is void if the serial number is altered, defaced, or removed.
A R T reserves the right to make changes in design or make additions to or improvements upon this product
without any obligation to install the same on products previously manufactured.
A R T shall not be liable for any consequential damages, including without limitation damages resulting from loss
of use. Some states do not allow limitations of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific rights and you may have other rights, which
vary from state to state.
For units purchased outside the United States, an authorized distributor of Applied Research and Technology
will provide service.
SERVICE
The following information is provided in the unlikely event that your unit requires service.
1.
Be sure that the unit is the cause of the problem. Check to make sure the unit has power, all cables are
connected correctly, and the cables themselves are in working condition. You may want to consult with your
dealer for assistance in troubleshooting or testing your particular
2.
If you believe that the ART unit is at fault, go to www.artproaudio.com.Select "Support", then "Return
Authorization Request" to request a return authorization number.
3.
If you are returning the unit for service, pack the unit in its original carton or a reasonable substitute. The
original packaging may not be suitable as a shipping carton, so consider putting the packaged unit in another
box for shipping. Print the RA number clearly on the outside of the shipping box. Print your return shipping
address on the outside of the box.
4.
Include, with your unit, a note with the RA number and your contact information, including a return shipping
address (we cannot ship to a P.O. box) and a daytime phone number, and a description of the problem,
preferably attached to the top of the unit. Also include a copy of your purchase receipt.
configuration.
13