Graco 116229 Instructions Manual

Used oil tank monitor

Download this manual

Instructions

Used Oil Tank

Monitor

Provides remote level monitoring of used oil and automatic pump air shutoff. Use with the

Graco Used Oil Evac System. Not intended for use in a caustic environment.

Part No.: 116229

150 psi (1.04 MPa, _10.4 bar) Maximum Working

Pressure

Important Safety Instructions

Read all warnings and instructions in this

manual and in the pump instruction man-

ual included with your system. Save all

instructions.

309238E

Table of Contents

Page 1 309238E Provides remote level monitoring of used oil and automatic pump air shutoff. Use with the Graco Used Oil Evac System. Not intended for use in a caustic environment. Part No.: 116229 150 psi (1.04 MPa, _10.4 bar) Maximum Working...
Page 2: Installation
NOTE: If an air regulator is to be used, be sure that it is connected to the air inlet port of the oil level monitor. See Fig 1 Graco Used Oil Evacuation Installation Guide. 1. Shut down system and relieve system pressure. Fol- 4.
Page 3 Installation 5. Connect pump supply line to outlet port (C, F . 3). NOTE: Make sure internal air hoses are connected and there are no kinks. 6. To verify operation: a. turn on main air supply, the pump should start. b.
Page 4: Technical Specifications
150 psi 1.04 MPa, 10.4 bar Recommended air working pressure 90 psi 0.62 MPa, 6.25 bar Recommended air working pressure with 50 psi 0.34 MPa, 3.44 bar Graco pump Materials of construction Air fittings Nickel plated brass Tubing Polyethylene Float Aluminum...
Page 5 Technical Specifications Dimensions 309238E...
Page 6: Graco Standard Warranty
With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective.