Dual-Port RS-232C
Attach the Synapse adapter cable to the Host port on the
scanner. Attach the appropriate Synapse cable to the
adapter cable, the host terminal, and auxiliary RS-232C
device. Attach the power supply to the Power port. If
additional scanning versatility is desired, plug a Synapse-
compatible scanner into the Hand-Held Laser Scanner port
(Figure
2-6).
LS 5700/
LS 5800
Power
Figure 2-6. Dual Port RS-232C
In this configuration, an external power supply is required.
Synapse
Adapter Cable
p/n 25-17072-01
Synapse Cable
Set Up
RS-232
Host
Terminal
Auxiliary
RS-232
Device
2-7