Layout
Figure 2-12
shows a typical LS 5800 installation. For best
operating results, locate the power supply at least 4 in.
(10.16 cm) below the scanner chassis or 2 in. (5.08 cm) away
laterally.
Scanner
Power Supply
Figure 2-12. Typical LS 5800 Installation
LS 5800-IXXXTN and LS 5800-IXXXTC models have a
Tempax Scratch-Resistant glass window. An in-counter
mounting kit is required for these models. Instructions for
mounting can be found in the LS 5800 Mounting & EAS
Installation Guide.
Host
I/F Cable
~66.5 in.
1690 mm
Cable Routing
Set Up
Synapse Cable
2-15