Parameter Menus
Hand-Held Laser Scanner Options
Program Hand-Held Scanner Only
LS 2603MX/LS 3603MX/LS 3203 Only
When this mode is enabled, parameter bar codes
scanned change the settings on the hand-held laser scanner
only. The LS 5700/LS 5800 (primary scanner) is not affected.
Any changes made to the decode parameters (i.e., code
types, lengths or check digits) are not recognized by the
primary scanner. However, if any of these parameters on
the primary scanner is changed, the change overrides the
hand-held scanner setting.
PROGRAM HAND-HELD SCANNER ONLY
5-87