Assembling The Ring Scanner - Symbol WSS 1000 Product Reference Manual

Assembling the Ring Scanner

1. Adjust the strap of the ring mount to fit your right or left index and middle fingers:
a. Slip the mount onto your right or left index and middle fingers, oriented so the
trigger is next to your thumb.
b. If necessary, adjust the strap so that the mount fits comfortably.
c. Remove the mount.
2. Insert the ring scanner in the ring mount, depending on right or left-handed use.
a. Determine whether the scanner will be used on a right or left arm.
b. Orient the ring scanner to the mount so that the trigger is next to the your thumb.
Figure 5-6. Placing the Ring Mount on Fingers
Figure 5-7. Adjusting Strap
Operating the WSS 1000
5-5