Cleaning The Tea Dispenser; Cleaning The Container; Cleaning The Faucet Parts, Lid And Drip Tray - Curtis G3 User Manual

Care | Daily cleaning
5.3.3

Cleaning the Tea Dispenser

Cleaning the Container

6 Prepare a mild solution from 30 g special cleaning
powder (see accessories) and 2 L warm water.
Remove the dispenser from the brewer and remove
the lid. Rinse.
6 Wash - Wipe the exterior surfaces with a sponge
and the detergent solution to remove spills and
debris. Use the detergent solution and a soft bristled
brush to wash the inside of the container.
6 Rinse - Rinse with clean, warm water
6 Sanitize* - Sanitize the interior of the dispenser
using a commercial sanitizer suitable for food grade
applications. Sanitize according to the directions on
the package.
* If a three compartment sink large enough to
submerge the dispenser is not available, swab, brush
or pressure spray the sanitizing solution according
to the directions on the package.
6 Air Dry - Turn the container upside down and allow
to air dry.

Cleaning the Faucet Parts, Lid and Drip Tray

6
Disassemble the faucet - Unscrew the faucet
assembly from the dispenser. Then, unscrew the
handle/bonnet assembly from the top of the faucet
and remove. Inspect the seat cup for wear. Replace
the seat cup if it is damaged.
6 Wash - Wash the lid, drip tray and faucet parts with
the detergent solution.
6 Rinse - Thoroughly rinse all parts with clean, warm
water.
6 Sanitize - After rinsing, place the faucet parts
in the sink to be sanitized. Immerse them in a
commercial sanitizer suitable for food grade
applications. Sanitize according to the directions on
the package
6 Air Dry - Allow all parts to thoroughly air dry.
40
Follow the accessories chapter,
customer care programm
 p age 59
User manual Curtis G3 Tea/Coffee Combo brewer