Curtis G3 User Manual page 31

Software | Control module
Coffee Drip-Out - sets the Coffee Drip-Out time.
Drip-out allows additional time for coffee
to drain from the brew basket before "Brewing"
disappears from the display. Once accessed ( ),
press the BREW button for which the Drip-Out time
needs to be changed (SHIFT+BREW selects half batch
on some models). Press or to increase or decrease
time. The range is Off to 5:00. Press to save. Press
to display the subsequent menu features.
Safety Sw On/Off - turns the feature On and Off.
Once accessed ( ), press or to toggle between
On and Off. Press to save. Press to display the
subsequent menu features.
Temperature -adjusts the maximum tank water
temperature. Once accessed ( ), press or to
increase or decrease the temperature. The range is 76ºC
to 97ºC. Press to save. Press to display the
subsequent menu features.
Energy Save Mode - saves energy during periods
when the brewer is not in use. When set to On, the
brewer automatically shuts off four hours after the
last brew cycle. Press the ON/OFF button to return to
normal operation. When set to On 60°C, the brewer
shuts off four hours after the last brew cycle, but the
water tank temperature remains at 60ºC. Use the On
60ºF setting to reach brewing temperature faster after
periods of non-use. Once accessed ( ), press or
to choose the desired setting. Press to save. Press
to display the subsequent menu features.
Brew Count Odom - When accessed, this feature
displays the total brew cycles since the odometer was
last reset. Press to go back without resetting or
to reset. Press to display the subsequent menu
features.
User manual Curtis G3 Tea/Coffee Combo brewer
31