Curtis G3 User Manual page 32

Software | Control module
Brew Count Total - when accessed ( ), displays the
total brew cycles on the brewer. It cannot be reset. The
display returns to the previous screen automatically
after a few seconds. Press
menu features.
Cold Brew Lock - adjusts the temperature at which
the brewer will brew when a BREW button is pressed
(Ready to brew appears on the display). This feature
also adjusts the temperature at which the heating
element turns on to reheat the water in the tank. The
available settings are 3°C, 8°C and OFF. OFF is within
17°C below the temperature setting. Once accessed
( ), press or to select the desired setting. Press
to save. Press
features.
Master Reset - resets the brewer universal control
module (UCM) to the factory default settings. Once
accessed ( ), „Are You Sure?" will appear on the
display. Press for Yes or
the display goes back to the programming menu. If you
press Yes, the UCM will reset and exit programming
mode.
• If you reset the UCM to the factory defaults,
you MUST reprogram the Model Select to
match the number on the model number
label and the label on the UCM for proper
operation.
Service call - sets the service phone number that
appears on the display when the UCM detects a
SENSOR ERROR or WATER ERROR. Once accessed ( )
press or to select the number to be changed.
Press repeatedly to change the number value. Press
or to select the next number to change. When
done, press until ex fl ashes on the display and press
. Press to display the subsequent menu features.
32
, to display the subsequent
to display the subsequent menu
for No. If you press No,
IMPORTANT
User manual Curtis G3 Tea/Coffee Combo brewer