Curtis G3 User Manual page 26

Software | Control module
4.1.3 Programming
See the fi rst page of the programming guide for
instructions on accessing each individual menu item.
some menues save and exit automatically when a
parameter is updated. Other menus exit to the previous
menu when a parameter is saved. To exit, press
EXIT appears on the display, then press
The following options are available:
Tea Recipes - sets the tea recipe. Press
Press or to choose from standard-gray,
standardpurple, Standard-Amber, Tropical-Gray,
Tropical-Purple, 76/308-Gray or 76/308-Purple.
Press to save and exit programming mode.
Tea by Volume - sets the tea brewing volume. After
selecting this feature ( )press the BREW button for
which the brew volume needs to be changed
(SHIFT+BREW selects half batch on some models). Place
an empty container under the (empty) brew basket.
Press the same BREW button again to start. When
the desired volume is reached, press the BREW button
again to stop the fl ow. The volume has been set. Press
to display the subsequent menu features.
Tea by time - sets the amount of tea brewed
according to time. Once accessed ( ), press the BREW
button for which the brew time needs to be changed
(SHIFT+BREW selects half batch on some models). Press
or to highlight minutes or seconds. Press
change the setting. The range is 0:00 to 9:59. Once
the amount of time is entered, press
fl ashing, then press
subsequent menu features.
Tea Dilut. Delay - sets the delay until tea dilution
begins. Once accessed ( ), press the BREW button for
which the dilution delay needs to be changed
(SHIFT+BREW selects half batch on some models). Press
26
.
until ex is
to save . Press to display the
until
to access.
to
User manual Curtis G3 Tea/Coffee Combo brewer