Table of Contents
Advertisement
PROGRAM SYSTEM SPEED DIAL
NAMES
This program is used to assign a character name or identification for each sys-
tem speed dial location. This name enables you to locate the speed dial number
when you are using the directory dial feature. You may assign a name 11 char-
acters long.
PROGRAM KEYS
UP & DOWN - Used to scroll through speed dial bins.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ACTION
1. Press TRSF and then 706
Display shows the first name
2. Dial the system speed number (e.g., 505)
OR press UP or DOWN to select the entry
number and press the right soft key to
move the cursor
3. Enter the name as shown in Program
Station Names and press the right soft
key to return to step 2 OR press the
F key to toggle to the speed dial number
to return to Program System Speed Dial
Numbers , step 4
4. Press the right soft key to return to step 2
above OR press TRSF to store and exit
programming OR press SPK to store and
advance to the next program
18
DISPLAY
SYS SPEED NAME
500:
SYS SPEED NAME
505:
SYS SPEED NAME
505:SAMSUNG
PROGRAM PERSONAL SPEED DIAL
NUMBERS FOR OTHER STATIONS
Individual station users can program their own numbers, but in cases where this
is not practical, or for single line telephone users, this program allows a system
administrator to view or change any station's speed dial numbers. The station
speed dial codes are 00–49. Each station begins with ten numbers (00–09) and
can be assigned more in blocks of ten (up to a maximum of fifty numbers).
Each speed dial number consists of a line access code and the telephone
number to be dialed. The access code can be any line group, individual line,
station group or individual extension. The speed dial number can be up to 18
characters long including ✱, #, FLASH and PAUSE.
NOTE: If Least Cost Routing (LCR) is used, the LCR access code must be
entered.
When you are entering a speed dial number, there are some special keys that
you will need to use. These are the bottom row of programmable keys on the
LCD 12B and LCD 24B keysets and are known as keys A, B, C, D, E and F.
PROGRAM KEYS
UP & DOWN - Scrolls through extension numbers and speed dial bins..
KEYPAD - Used to enter number.
HOLD - Press to clear entry.
A - Does not have a function.
B - Inserts a FLASH.
C - Inserts a PAUSE.
D - Changes the dialing type from pulse to tone.
E - Hides and displays digits.
F - Changes display to speed dial name entry.
12 BUTTON KEYSET
PROGRAMMABLE KEYS
LAYOUT
A B
C
D
E
F
24 BUTTON KEYSET
PROGRAMMABLE KEYS
LAYOUT
A
B
C
D
E
F
19
Advertisement
Table of Contents
