Gravely 891006 Owner/Operator & Parts Manual page 9

ASSEMBLE CATCHER (FIGURE 7)
1. Attach inlet adapter (item 1) onto receptacle
assembly (item 2) with (4) 5/16-18 x 3/4 hex bolts
(item 10) and 5/16-18 nyloc nut (item 18).
2. Enlarge mounting holes in receptacle (item 2) to
13/32" diameter.
3. Attach receptacle assembly (item 2) onto upper
mount (item 3) with eight 3/8-16 x 1 hex bolts
(item 13), eight 7/16 x 1 x 5/64 flat steel washers
(item 25) and eight 3/8-16 nyloc nuts (item 19).
13
25
Mounting
Holes
18
Item Description
1 Inlet Adapter
2 Receptacle
3 Upper Mount
10 5/16-18 x 3/4 Hex
Bolts
2
10
1
Item Description
13 3/8-16 x 1 Hex Bolts
18 5/16-16 Nyloc Nut
19 3/8-16 Nyloc Nuts
25 7/16 x 1 x 5/64 Flat
Washers
Figure 7
ATTACH CATCHER TO LOWER MOUNT
(FIGURE 8)
1. Secure 3/8-16 x 1 3/4 round head square neck bolts
(item 16) and 13/32 x 1 1/2 x 15/16 flat washers
(item 23) to upper mount (item 3) with 3/8 push nut
(item 20).
2. Slide catcher assembly into lower mount (item 4).
Rotate up and secure with 3/8-16 nyloc nut
(item 19) or 3/8" wing nut (item 21) and 3/8 x .115
locking washer (item 22).
NOTE: For ease of assembly, use latch attached to
upper mount (item 3) to temporarily hold the mount onto
lower mount (item 4) while securing mounting hardware.
3. Install grass bag (item 7) in cover assembly
(item 2).
16
19
2
3
Latch
Item Description
2 Receptacle
3 Upper Mount
4 Lower Mount
16 3/8-16 x 1 3/4
Round Head
Square Neck Bolt
19 3/8-16 Nyloc Flange
Nut
9
3
23
20
19
4
Item Description
20 3/8 Push Nut
21 3/8-16 Wing Nut
(Optional Tooless
Hardware)
22 3/8 x .115 Heavy
Locking Washer
(Optional Tool-less
Hardware)
23 13/32 x 1-1/2 x
15/64 Flat Steel
Washer
Figure 8
21
22