Assembly - ALDI Auto XS User Manual

ASSEMBLY

WARNING
Always disconnect the plug from the car outlet before removing the
tank cover.
Install both foam filter and reusable cloth filter to pick up dust and dry
material only. If the foam filter has been used to pick up liquids, the foam
filter must be cleaned and dried before installing for dry pick-up.
1. Hold the power head in an upside
down position.
2. Slide foam filter over lid cage
pulling until foam filter completely
covers lid cage.
3. Slide the cloth filter down
completely over the foam filter.
4. Slide mounting ring down over
reusable cloth filter until ring is
positioned against the ribs of
lid cage. The reusable cloth filter
should be in position over the
foam filter for dry pick-up.
NOTE:
Ensure that the mounting ring is completely secure and in position
by pushing down firmly around the ring in several places. Be sure the
reusable cloth filter completely covers the foam filter. Also check to
ensure that all edges of the reusable cloth filter are secure under the
mounting ring.
1.
3.
Assembly
2.
4.
5