Assembly - ALDI Ferrex NTS16 User Manual

AUS

Assembly

VII. Assembly
m IMPORTANT!
Prior to use, ensure that the device has been correctly and fully assembled.
Unpacking (Fig. 1, 2, 3)
1 Release the locking hooks (4) and remove the machine head (2). The accessories
are located inside the container (6). Only the plastic extension tubes (3x) are locat-
ed outside the container (6), in the packaging. Remove all of the accessories from
the container (6).
Installing the castors (Fig. 4)
1. Press the four castors (5) into the holes in the castor mounts.
Installing the machine head (2) (Fig. 5)
1 Place the machine head (2) on the container (6). Secure the machine head (2) with
the locking hooks (4). When installing the machine head (2), ensure that the locking
hooks (4) latch into place correctly.
Installing the foam filter (13) (Fig. 6)
Never use the device without filter! Always ensure that the filters are correctly fitted!
Installing the foam filter (13): For wet vacuuming, slide the foam filter (13) provided
over the filter basket with safety float valve (11).
Installing the paper filter bag (14) (Fig. 7)
It is recommended to use an additional paper filter bag (14) when vacuuming fine, dry
dirt. Slide the paper filter bag (14) over the suction opening in the container (6). The
paper filter bag (14) is only suitable for dry vacuuming. The paper filter bag (14) makes
it easier to dispose of the dust collected.
Fitting the cloth filter (Fig.2/3)
For dry vacuum cleaning always use the supplied cloth filter (18) additionally to the
paper filter bag (14). Slip the cloth filter (18) over the filter basket (11).
Installing the suction hose (Fig. 8, 9)
Connect the suction hose (12) to the corresponding port, depending on the desired
use, on the wet and dry vacuum.
14
 support@scheppach.com.au
MODEL: NTS16 PRODUCT CODE: 706650 10/2021
AFTER SALES SUPPORT

NTS16
1300 855 831