Table of Contents
Advertisement
AUS
Assembly
VII. Assembly
m Warning! Ensure the appliance is correctly and completely assembled
before use.
Unpacking (Fig.1.1)
1
Unlock the locking hooks (8) and remove the appliance head (3). Remove all
accessories from the container (7).
Mounting of the castors (Fig.2)
1
Place the container (7) upturned on the ground.
2
Push the castors (5) into the holes at the bottom of the container.
Mounting appliance head and handle (Fig.3)
1
Place the appliance head (3) onto the container (7). Secure the appliance head
(3) with the locking hook (8). When fitting the appliance head (3), make sure that
the locking hook (7) locks into place correctly.
2
Place the handle (1) on the machine head (3) and secure it with the two screws
(14) by using a screwdriver (not included).
Fitting the filter (Fig.4/5)
Never use the appliance without a filter! Always ensure that the filters are
correctly mounted
1
Fitting the foamed plastic filter (12): For wet-vacuuming, slip the supplied foamed
plastic filter (12) over the filter basket. (Fig.4)
2
Fitting the additional filter (16): For dry vacuum cleaning always use the supplied
additional filter (16). Slip the additional filter (16) over the filter basket (9). (Fig.5)
Assembling the paper bag (Fig.6)
For vacuuming fine, dry dirt it is recommended that you use the paper bag (13). Slip
the paper bag (13) over the vacuuming hole inside of the container (7). The paper
bag (13) is suitable for dry-vacuuming only. The paper bag (13) makes it easier to
dispose of the sucked-in dust.
14
support@scheppach.com.au
MODEL: ASP12-ES PRODUCT CODE: 62361 10/2018
AFTER SALES SUPPORT
ASP12-ES
1300 855 831
Advertisement
Table of Contents
