Connecting The Aerial - JVC LT-26D50 Instructions Manual

Dynapix lcd idtv with d.i.s.t.
Table of Contents

Advertisement

Connecting the aerial

• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.
Caution
• Turn off all the equipment including the TV before connecting anything.
If you connect via a device with an
antenna terminal such as a VCR,
follow A → B → C → D in the
diagram opposite.
If you connect the antenna
directly to the TV, follow 1 → C.
To use the T-V LINK functions, you must
have a T-V LINK compatible VCR
connected by a SCART cable D to the EXT-
2 terminal on the TV. For details about T-V
LINK functions, see "T-V LINK functions"
on page 13.
• The two-way splitter is not included.
Please supply one separately.
• If you are not going to watch Analogue
terrestrial broadcasting, only connect C.
In this case, a two-way splitter is not
necessary.
• To connect more equipment, please see
"Connecting external equipment" on
page 63.
• To connect additional audio equipment,
see "Connecting speakers/amplifier" on
page 66.
• If you connect a decoder to a T-V LINK
compatible VCR, set the DECODER
(EXT-2) function to ON. For details, see
"" on page 57.
Otherwise, you will not be able to watch
scrambled channels.
• When receiving Digital terrestrial
broadcasting (DVB-T), reception can
suddenly be lost if the signal becomes
weak. Use a correctly installed high-
performance antenna.
• When connecting via a device with an
antenna terminal such as a VCR, depending
on the connection method, the signal may
be weakened. If this happens, use a booster
to increase the signal strength.
• In areas with a lot of radio communication
such as near ports or airports, noise may
be introduced into the picture or sound. In
such cases, reception may be improved by
using a high-performance antenna.
• Read the instruction manual of the
devices which you connect to the TV.
without terminal covers
21-pin
SCART
Cable
VCR
AV IN/OUT
Terminal
Setting up your TV
Aerial
75-ohm
Coaxial
Cable
IN
Two-way
splitter
(Not supplied)
OUT
OUT
75-ohm
75-ohm
Coaxial
Coaxial
Cable
Cable
To Aerial
Input
To Aerial
Output
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents