Decoder (Ext-2); Component Auto Select - JVC LT-26D50 Instructions Manual

SET UP menu

DECODER (EXT-2)

If you have a decoder connected to a T-V
LINK compatible VCR, which in turn is
connected to the EXT-2 terminal, use the
DECODER (EXT-2) function to unscramble
the scrambled TV channels.
1 Turn on the decoder power
2 Display the scrambled TV channel
on the TV
Even if the decoder is working, a
scrambled picture appears.
3 Display the SET UP menu and
choose DECODER (EXT-2)
SET UP
AUTO PROGRAM
EDIT/MANUAL
DECODER(EXT-2)

COMPONENT AUTO SELECT

EXT SETTING
OK
D0029 -EN
4 Press the 5 buttons to choose
ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the 5 buttons to choose OFF.
5 Press the a button to complete
the setting
The T-V LINK menu appears.
T-V LINK
DOWNLOAD TV
OK
D0005-EN
You can send the programme numbers
data to a VCR with the T-V LINK
function.
58
OFF
OFF
RECORDING DEVICE
EXIT
6 Turn on the VCR, and then press
the a button to transmit the data
to recording device
The T-V LINK menu disappears once the
data transmission ends.
If the DECODER (EXT-2) function has
been set to "ON" but the TV channel cannot
be unscrambled, check the following:
• Has the decoder been connected to the
VCR properly according to the VCR
and decoder instruction manuals?
• Has the decoder power been turned on?
• Can the TV channel be unscrambled
with a decoder?
• Do you need to change the recording
device settings in order to connect the
decoder? Confirm that the VCR is set
properly by rechecking the VCR
instruction manual.
COMPONENT AUTO SELECT
When a external device that can output a
component signal is connected to the EXT-4
component terminal and the connected
device is played back, the TV input is
automatically changed to EXT-4.
ON:
When the device connected to EXT-4 is
played back, the TV input is automatically
changed to EXT-4.
OFF:
Even when the device connected to EXT-4 is
played back, the TV input is not changed.
(Set to OFF when shipped from the factory.)
• This function automatically changes the
TV input to EXT-4 when the TV detects a
component input signal from the device
connected to the EXT-4.
• When set to ON, the TV input may be
automatically changed to EXT-4 just by
an operation such as turning the power on,
removing a disc, or another operation
with a device (such as a DVD player).
• The COMPONENT AUTO SELECT
function does not work when you are
watching Digital terrestrial broadcasting
(DVB-T) or a PC picture.