Set Up Menu; Auto Program (Analogue); Edit/Manual (Analogue) - JVC LT-26D50 Instructions Manual

SET UP menu

SET UP
AUTO PROGRAM
EDIT/MANUAL
DECODER(EXT-2)
COMPONENT AUTO SELECT
EXT SETTING
OK
D0029 -EN
• AUTO PROGRAM, EDIT/MANUAL,
and DECODER (EXT-2) cannot be
chosen when watching Digital terrestrial
broadcasting (DVB-T).

AUTO PROGRAM (Analogue)

You can again perform the AUTO
PROGRAM function TV channel automatic
registration which was performed in the
"Initial settings" (page 10).
To receive SKY 1 you need a satellite tuner.
You must have the satellite tuner set to SKY
1 before starting the AUTO PROGRAM
function.
1 Choose AUTO PROGRAM, then
press the a or 3 button
The COUNTRY menu appears.
2 Perform any extra operations you
need to perform in step 5
(operations after AUTO PROGRAM
ends) and step 6 of "Initial
settings"

EDIT/MANUAL (Analogue)

The EDIT/MANUAL functions are divided
OFF
into two types:
OFF
Here are the details about these functions:
MOVE:
This function changes the programme
number (PR) of a TV channel.
ID:
This function registers a channel name (ID)
to a TV channel.
INSERT:
This function adds a new TV channel in the
current programme numbers (PR) list by
using the CH number.
DELETE:
This function deletes a TV channel you do
not want to list.
MANUAL:
This function manually stores a new TV
channel in a programme number (PR).
Caution
• Using the MOVE, DELETE or INSERT
functions rewrites the current programme
numbers (PR) list. Therefore, the
programme numbers (PR) of some of the
TV channels will change.
• Using the MANUAL function for a TV
channel for which the CHILD LOCK
function has been set cancels the CHILD
LOCK function for that channel.
• Using the MANUAL function for a TV
channel for which the DECODER (EXT-2)
function has been set to ON returns the
setting of the DECODER (EXT-2) function
for that channel to OFF.
• When a TV channel has already been
registered in PR 99, using the INSERT
function deletes that TV channel.
• editing the current programme numbers
(PR) (EDIT functions); and
• manually storing a TV channel you want
to view on a particular programme
number (PR) (MANUAL function).
• You cannot use the INSERT function if
you do not know the channel number of a
TV channel. Use the MANUAL function
to register a TV channel in the programme
number (PR).
53