Adjust The Volume; Zoom Function - JVC LT-26D50 Instructions Manual

• Since this TV is designed to make full use
of the resolution of the original video
source, the motion may appear unnatural
when the video source is input with
progressive-scanning component signals.
If this happens, change the output setting
of the connected device to interlace-
scanning component signal output. See
the instructions that came with the device
for more information.
• The PC sound is the same as the EXT-3
sound.
To return to a TV channel:
button, the p p
TV/DTV
Press the
buttons or the number buttons.
To use the programme number PR 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number PR 0
(AV) manually. For details, see "EDIT/
MANUAL (Analogue)" on page 53.
Pressing the G button changes the choice as
follows:
TV mode
Analogue
PR 0
terrestrial
broadcasting
Digital terrestrial
broadcasting
(DVB-T)
• The VCR sends its playback image along
the aerial cable as an RF (radio frequency)
signal.
• Also see your VCR instruction manual.
EXT modes
EXT-2
EXT-1
E2 S2
E1 or S1 or
EXT-3
or S3
E3
EXT-4
PC
E4
Basic operations (Remote control)

Adjust the volume

Press the r q buttons to adjust
the volume.
The volume level indicator appears and the
volume changes as you press the r q
buttons.
Muting the sound
Press the l (muting) button to
turn off the sound.
Pressing the l (muting) button again
restores the previous volume level.

ZOOM function

You can change the screen size according to
the picture aspect ratio. Choose the optimum
one from the following ZOOM modes.
AUTO:
When a WSS (Wide Screen Signalling)
signal, which shows the aspect ratio of the
picture, is included in the broadcast signal or
the signal from an external device, the TV
automatically changes the ZOOM mode to
16:9 ZOOM mode or FULL mode according
to the WSS signal.
If a WSS signal is not included, the picture is
displayed according to the ZOOM mode set
with the 4:3 AUTO ASPECT function.
• For details of the 4:3 AUTO ASPECT
function, see "4:3 AUTO ASPECT" on
page 48.
• When the AUTO (WSS) mode does not
function correctly due to poor WSS signal
quality or when you want to change the
ZOOM mode, press the c button
and change to another ZOOM mode.
• When watching a 16:9 FULL programme
with Digital terrestrial broadcasting
(DVB-T), the aspect ratio is FULL.
REGULAR:
Use to view a normal picture (4:3 aspect
ratio) as this is its original shape.
19